TB1551

TB1551 Torsion BAR for Ford Ranger Pj, PK UTE / Dual CAB (duratorq)

TB1551 Torsion BAR.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
TB1551 Torsion BAR for Ford Ranger Pj, PK UTE / Dual CAB (duratorq) product image

Part specs

heights
[]
positions
['Front']
shock_types
[]
vehicle_count
2

Unlike a coil or leaf, a torsion bar springs the front by twisting along its length — and the RAW 4x4 TB1551 is a replacement torsion bar listed to fit the Duratorq Ford Ranger PJ and PK ute and dual-cab.

What a torsion bar is and how it works

A torsion bar is the front spring on this style of ute: a long steel bar anchored at one end to the chassis and at the other to the lower control arm, so it resists the up-and-down of the wheel by twisting. Adjusting its preload is also how front ride height is set on a torsion-bar front end. The TB1551 is a direct replacement bar for the PJ/PK Ranger's front.

Why replace a torsion bar?

Torsion bars can sag or lose their set over time, dropping the front and reducing how much height adjustment is left in the system. A fresh bar restores the designed spring behaviour and gives back the adjustment range. RAW 4x4 hasn't published a rate figure we can quote, so we set ride height to your vehicle rather than to a number.

Will the TB1551 suit my PJ/PK Ranger?

It's listed to fit the Ford Ranger PJ and PK with the Duratorq engine in ute and dual-cab form — the generation that shared underpinnings with Mazda. Torsion bars are side- and application-specific, so confirm your exact model and which side you need with the workshop before ordering.

Fitting and ride-height set-up in the Illawarra

Oak Flats Muffler Men fits torsion bars and sets front ride height in-house across the Illawarra. We index the new TB1551 correctly, adjust the preload to suit how your Ranger is loaded, and check the front geometry afterwards.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

How is a torsion bar different from a coil spring?
It springs the front by twisting along its length instead of compressing like a coil. On the PJ/PK Ranger it also sets front ride height via its preload adjustment.
Does the TB1551 fit my Duratorq Ranger?
It's listed for the Ford Ranger PJ/PK Duratorq ute and dual-cab. Confirm your exact model and which side you need with the workshop first.
Can you adjust ride height after fitting?
Yes — setting front height is part of fitting a torsion bar. We adjust the preload to suit your vehicle at our Illawarra workshop.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.