Patrol Y62 V8 5.6L 3in System, HPC-Extractor, Cats, Centre Hotdog, Rear
MPI AutomotiveRRP$6006.84Patrol Y62 V8 5.6L 3in System, HPC-Extractor, Cats, Centre Hotdog, Rear Tailpipe.
View partBOL05
14mm Head, (M10) 10mm x 1.5p, 25mm Long, (Nissan Patrol, D22, Falcon Extractor Bolt)
14mm Head, (M10) 10mm x 1.5p, 25mm Long, (Nissan Patrol, D22, Falcon Extractor Bolt) for selected vehicle applications.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $2.56 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- BOL05
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Stock status
- In stock at supplier
The MPI Automotive BOL05 is a single extractor bolt with a 14mm head, an M10 x 1.5 thread and a 25mm length, listed for the Nissan Patrol, Nissan Navara D22 and Ford Falcon. It's the individual fastener for bolting extractors or manifolds to the head, sold one at a time.
What is this extractor bolt and where does it go?
An extractor bolt clamps the extractor or manifold flange against the cylinder head. It works in a hot, high-vibration joint, which is why these bolts are usually replaced rather than reused — heat cycling can seize a bolt or leave it short on clamp load. The BOL05 is the single-bolt option: a 14mm head, M10 x 1.5 thread and 25mm length, handy when you've stripped or lost one or two during a fit-up rather than needing a full pack. There are no performance figures on a bolt; what matters is the head, thread and length matching your application.
Will it suit my vehicle?
It's listed for the Nissan Patrol, the Nissan Navara D22 and the Ford Falcon. The dimensions are set — 14mm head, M10 x 1.5 thread, 25mm long — so the question is whether your extractor and head use that fastener. Confirm the bolt size against your setup with the workshop before ordering, since the listing covers the application, not your exact build.
Is it road legal?
A single bolt is hardware and doesn't affect registration status on its own — it's neither an emissions nor a noise component. Compliance rests with the exhaust system the bolt helps hold together. If you're unsure about your full system, ask the workshop.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men uses fasteners like the BOL05 when fitting and servicing extractors across the Illawarra. We match the bolt to the flange, clean the threads, and torque the joint evenly so it seals against the gasket. If you're after a replacement for a single stripped bolt, bring the part in and we'll confirm the spec.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is the BOL05 sold individually?
- Yes — it's a single bolt with a 14mm head, M10 x 1.5 thread and 25mm length. Packs of 25 and 50 are also listed separately.
- What does it fit?
- It's listed for the Nissan Patrol, Nissan Navara D22 and Ford Falcon. Confirm the bolt size against your extractor with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Nissan Patrol Y62 V8 5.6L Wagon 3in Full System-Extractors, Hi Flow
MPI AutomotiveRRP$5688.68Nissan Patrol Y62 V8 5.6L Wagon 3in Full System-Extractors, Hi Flow Cats, Medium, Sml Centre Muffler.
View part
Nissan Patrol Y62 V8 5.6L Wagon 3in Full Exhaust System - Extractors, Hi
MPI AutomotiveRRP$5688.68Nissan Patrol Y62 V8 5.6L Wagon 3in Full Exhaust System - Extractors, Hi Flow cats, muffler centre (SKU.
View part
Nissan Patrol Y62 V8 5.6L Wagon 3in Full Exhaust System - Extractors, Hi
MPI AutomotiveRRP$5667.67Nissan Patrol Y62 V8 5.6L Wagon 3in Full Exhaust System - Extractors, Hi Flow cats, hotdog centre.
View part
Nissan Patrol Y62 V8 5.6L Wagon 3in Full Exhaust System - Extractors, Hi
MPI AutomotiveRRP$4775.03Nissan Patrol Y62 V8 5.6L Wagon 3in Full Exhaust System - Extractors, Hi Flow cats, muffler centre (SKU.
View part
Nissan Patrol Y62 V8 5.6L Wagon 3in Full System-Extractors, Hi Flow
MPI AutomotiveRRP$4775.03Nissan Patrol Y62 V8 5.6L Wagon 3in Full System-Extractors, Hi Flow Cats, Medium, Sml Centre Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.