BSK1001

BSK1001 Bush/shackle/pin/u Bolt KIT for Foton Tunland Ute/dual CAB

BSK1001 Bush/shackle/pin/u Bolt KIT for Foton Foton Tunland Ute/dual CAB for selected vehicle applications.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
BSK1001 Bush/shackle/pin/u Bolt KIT for Foton Foton Tunland Ute/dual CAB product image

Part specs

heights
[]
positions
['Rear']
shock_types
[]
vehicle_count
4

Listed to fit the Foton Tunland, ute dual-cab, the RAW 4x4 BSK1001 gathers the rear leaf-spring hardware into one kit: bushes, shackles, pins and U-bolts. These are the wearing mounting components that locate and clamp the pack.

What's in a bush, shackle, pin and U-bolt kit?

As the name says, this BSK1001 kit covers the rear leaf-spring hardware: the bushes that cushion the spring eyes, the shackles and pins that let the pack flex, and the U-bolts that clamp it to the axle. These are the parts that perish or stretch over time, so the kit refreshes the mountings without replacing the leaf pack.

Why replace this hardware?

Worn spring bushes and tired U-bolts let the rear axle move where it shouldn't, which shows up as clunks, poor axle location and uneven tyre wear. Renewing the BSK1001 kit restores the way the pack is held and clamped. RAW 4x4 doesn't publish individual dimensions here, so exact contents are confirmed against your build on order.

Will it fit a Foton Tunland?

It's listed to fit the Foton Tunland, ute dual-cab. Because shackle and U-bolt sizing is specific to the rear setup, send us your exact variant and we'll confirm the BSK1001 kit suits before ordering it in.

Fitting in the Illawarra

Oak Flats Muffler Men fits this hardware in-house. It's natural to do alongside a leaf-spring change or as standalone maintenance; we support the axle, renew the bushes, pins, shackles and U-bolts, and torque everything back to spec.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Does the BSK1001 kit fit my Foton Tunland?
It's listed to fit the Foton Tunland, ute dual-cab. Confirm your exact variant with the workshop before ordering.
Does this include the leaf spring?
No, this is the bush, shackle, pin and U-bolt hardware kit, not the leaf pack itself. It's the mounting and clamping parts.
Can you fit it with a spring change?
Yes, that's a sensible pairing. We can renew this hardware while the leaf pack is out, or fit it on its own as maintenance.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.