BSK1007

BSK1007 Bush/shackle/pin/u Bolt KIT for Toyota Hilux Rn106, Ln107, Ln108, LN / RN

BSK1007 Bush/shackle/pin/u Bolt KIT.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
BSK1007 Bush/shackle/pin/u Bolt KIT for Toyota Hilux Rn106, Ln107, Ln108, LN / RN / Yn110, LN111 UTE / Dual… product image

Part specs

heights
[]
positions
['Rear']
shock_types
[]
vehicle_count
2

A complete bush, shackle, pin and U-bolt kit, the RAW 4x4 BSK1007, is listed to fit the Toyota Hilux RN106 LN107 LN108 Ln Rn YN110 LN111 Ute Dual. It packages the perishable mounting hardware that wears out around the leaf springs.

What does this hardware kit cover?

This kit gathers the consumable hardware that locates and mounts a leaf-sprung rear axle — bushes, shackles, pins and U-bolts. These are the parts that perish, rust and develop play over time, causing rear-end clunks and sloppy location. Fitting the BSK1007 as a set means the wear points are renewed together rather than one at a time, which is the sensible approach when a leaf pack is off the vehicle.

Will it fit my Toyota Hilux?

It's listed to fit the Toyota Hilux RN106 LN107 LN108 Ln Rn YN110 LN111 Ute Dual. Kit contents are matched to the specific chassis, so confirm your exact model and build with the workshop before ordering to make sure the shackle and U-bolt dimensions line up with your truck.

Are there compliance considerations?

These are mechanical mounting components, not exhaust or emissions parts, so exhaust road-legality rules don't apply. Renewing worn bushes and U-bolts is straightforward maintenance that helps the rear suspension work as intended.

How do we fit it in the Illawarra?

Oak Flats Muffler Men fits these kits in-house in the Illawarra, usually at the same time as a leaf-spring change or rear-end refresh so the bay time is shared. Pricing on this line is confirmed on request — it can be a special-order item, so check current cost and availability with the workshop.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Will the BSK1007 fit my Toyota Hilux?
It's listed to fit the Toyota Hilux RN106 LN107 LN108 Ln Rn YN110 LN111 Ute Dual. Confirm your exact chassis code and build with the workshop so the kit contents match.
When should I replace this hardware?
When the rear end clunks, the bushes are perished or you have the leaf pack off for other work — it's sensible to renew the lot together.
Can you fit it with a leaf-spring change?
Yes — we commonly fit these kits alongside a new leaf pack so the labour overlaps.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.