TB0203 Torsion BAR for Mitsubishi Challenger / G Wagon PA II 4 Door
RAW 4x4RRP pendingTB0203 Torsion BAR.
View partBSK1021
BSK1021 Bush/shackle/pin/u Bolt KIT for Mitsubishi Triton / L200 Me, Mf, Mg, Mh, MJ
BSK1021 Bush/shackle/pin/u Bolt KIT. Fast shipping, warranty included.
BrandRAW 4x4
Category: Suspension and 4x4 parts
RRP pending
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- heights
- []
- positions
- ['Rear']
- shock_types
- []
- vehicle_count
- 4
The RAW 4x4 BSK1021 is a bush, shackle, pin and U-bolt kit listed to fit the Mitsubishi Triton/L200 ME, MF, MG, MH and MJ dual cab ute, petrol and diesel — the hardware that mounts and renews the rear leaf assembly.
What's in a bush, shackle, pin and U-bolt kit?
This kit gathers the wear items around the leaf-spring mounts: the bushes the leaf pivots on, the shackle that lets the spring lengthen under load, the pins that join them and the U-bolts that clamp the leaf to the axle. Fitting the BSK1021 is how you renew that hardware when leaves are replaced or the originals are worn. Exact bush material and piece count aren't published, so we don't quote them.
Does the BSK1021 suit my Triton/L200?
It's listed to fit the ME, MF, MG, MH and MJ Triton/L200 dual cab ute, petrol and diesel. Mount hardware is model-specific, so we confirm your exact build before ordering. The listing is 'listed to fit', so we verify it against your ute.
How is it priced?
The BSK1021 is at pending pricing from RAW 4x4, so it's quoted per order. Ask the workshop and we'll return a current figure with the fitment confirmed. Because it is a special-order RAW 4x4 part, we quote the BSK1021 against your specific Triton/L200 build and let you know the expected turnaround at the same time.
Fitting at Oak Flats
Oak Flats Muffler Men fits this hardware in the Illawarra, usually alongside a leaf-spring job while the rear axle is supported. Send your Triton's details and we'll book it in. Renewing this hardware at the same time means the leaf pivots and clamps as it should, rather than working against tired bushes once the new parts are in.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the BSK1021 include?
- It's a kit of bushes, shackle, pins and U-bolts for the rear leaf assembly, listed to fit the ME-MJ Triton/L200 dual cab ute.
- Should it be done with new leaves?
- It's commonly fitted at the same time as leaf springs, since the axle is already supported and the hardware is the matching wear set.
- What's the cost?
- Pricing is pending from RAW 4x4 — contact Oak Flats Muffler Men for a per-order quote.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More suspension and 4x4 parts the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
G6016Y Shock Absorber Nitro MAX for Mitsubishi Challenger / G Wagon PA
RAW 4x4RRP pendingRAW 4x4 G6016Y Shock Absorber Nitro MAX.
View part
RC 0344 Coil Spring for Mitsubishi Challenger / G Wagon PA II 4 Door
RAW 4x4RRP pendingRC 0344 Coil Spring. Quality guaranteed.
View part
G6346 2027 Shock Absorber Nitro for Mitsubishi Challenger PB Wagon
RAW 4x4RRP pendingG6346 2027 Shock Absorber Nitro. Quality guaranteed.
View part
G6346 2028 Shock Absorber Nitro for Mitsubishi Challenger PB Wagon
RAW 4x4RRP pendingG6346 2028 Shock Absorber Nitro.
View part
PR346S 2027 Shock Absorber Nitro for Mitsubishi Challenger PB Wagon
RAW 4x4RRP pendingRAW 4x4 PR346S 2027 Shock Absorber Nitro.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.