BSK1024

BSK1024 Bush/shackle/pin/u Bolt KIT for Toyota Hilux Ln105, RN105 / Ln106, RN106 UTE

BSK1024 Bush/shackle/pin/u Bolt KIT.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
BSK1024 Bush/shackle/pin/u Bolt KIT for Toyota Hilux Ln105, RN105 / Ln106, RN106 UTE (petrol) product image

Part specs

heights
[]
positions
['Front']
shock_types
[]
vehicle_count
2

The RAW 4x4 BSK1024 is a spring-mounting kit listed to fit the petrol Toyota Hilux LN105/RN105/LN106/RN106 ute — the bushes, shackles, pins and U-bolts that anchor the rear leaf packs to the chassis. On a solid-axle Hilux of this era it's the hardware that wears out long before the springs do.

What's a bush, shackle, pin and U-bolt kit for?

It's the fitting hardware around a leaf-sprung rear end, not a spring or damper. The bushes cushion the pivot points, the shackles and pins let the spring lengthen as it flexes, and the U-bolts clamp the pack to the axle. On these older live-axle Hiluxes those parts perish and stretch with age and load, which is what the BSK1024 renews as a set.

Will it suit my LN105/RN105/LN106/RN106 Hilux?

It's listed to fit the petrol Toyota Hilux in the LN105, RN105, LN106 and RN106 chassis codes. Those codes are the detail that matters, because the hardware changes across the Hilux range, so the chassis code is what we check against rather than just the model name. Send us yours and we'll confirm the BSK1024 is the right kit before ordering.

Is it a compliance item?

No — spring hardware is a mechanical fitting, not an emissions part, so it raises none of the catalytic-converter questions an exhaust would. If it's renewed as part of a height change, any engineering requirements come from the overall build. RAW 4x4 publishes no approval here and we won't imply one.

How do we fit it at Oak Flats?

Oak Flats Muffler Men fits these kits in-house across the Illawarra, normally when the rear springs are off for a service or upgrade so the shackles and U-bolts go on fresh. Send your chassis code and we'll confirm the BSK1024 suits your petrol Hilux and book it in.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Which Hiluxes does the BSK1024 cover?
The petrol Toyota Hilux in LN105, RN105, LN106 and RN106 chassis codes. Confirm your exact code with us so we match the right kit.
Is this a spring or just the hardware?
It's the mounting hardware — bushes, shackles, pins and U-bolts. The leaf springs themselves are separate.
Can you supply and fit it in the Illawarra?
Yes. We fit RAW 4x4 Hilux suspension hardware at Oak Flats, usually alongside a spring change.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.