BSK1028

BSK1028 Bush/shackle/pin/u Bolt KIT for Toyota Landcruiser 70 Series FJ / Bj70, Bj71, FJ

BSK1028 Bush/shackle/pin/u Bolt KIT. Quality guaranteed.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
BSK1028 Bush/shackle/pin/u Bolt KIT for Toyota Landcruiser 70 Series FJ / Bj70, Bj71, FJ / Bj73, FJ / BJ74… product image

Part specs

heights
[]
positions
['Rear']
shock_types
[]
vehicle_count
1

The RAW 4x4 BSK1028 is a bush, shackle, pin and U-bolt kit listed to fit the Toyota Landcruiser 70 Series mid-wheelbase models — FJ/BJ70, BJ71, FJ/BJ73 and FJ/BJ74. It's the leaf-spring mounting hardware, not a spring or damper.

What the kit replaces

A leaf-sprung 70 Series uses bushes for the spring eyes to pivot in, a shackle and pin to let the spring extend as it flexes, and U-bolts to clamp the pack to the axle. Years of off-road work perish the bushes and stretch the U-bolts, leaving clonks and a loose rear. The BSK1028 packages those wear items so the spring mounts on a hard-used 70 can be renewed together.

Best done with a spring change

Fitting new leaf springs onto perished bushes and tired U-bolts wastes the springs, so this kit is normally installed at the same time as a spring job. New springs pivoting on new bushes and clamped by new U-bolts is what genuinely restores a saggy, noisy 70. If you're tracking a specific noise, we'll find the worn part first.

Fitment for the mid-wheelbase 70

The BSK1028 is listed for the mid-wheelbase FJ/BJ70, BJ71, FJ/BJ73 and FJ/BJ74. Contents can depend on your spring setup, so confirm your exact 70 Series build with us before ordering rather than relying on the model range.

Fitting in the Illawarra

Oak Flats Muffler Men installs leaf-spring hardware kits like the BSK1028 at our Oak Flats workshop, ideally combined with a spring change. RAW 4x4 supply this kit for the mid-wheelbase 70 Series; the price is being confirmed, so ask us for the current figure when you book.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Is the BSK1028 a spring or hardware?
It's hardware — the bush, shackle, pin and U-bolt set that mounts the leaf springs to the 70 Series. The springs themselves are separate parts.
Does it fit a BJ74 Landcruiser?
It's listed for the mid-wheelbase models including FJ/BJ74. Confirm the exact contents for your build with the workshop before ordering.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.