BSK1030

BSK1030 Bush/shackle/pin/u Bolt KIT for Toyota Landcruiser 75 Series Bj75, Fj75, HJ75

BSK1030 Bush/shackle/pin/u Bolt KIT.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
BSK1030 Bush/shackle/pin/u Bolt KIT for Toyota Landcruiser 75 Series Bj75, Fj75, HJ75 CAB Chassis & Troop… product image

Part specs

heights
[]
positions
['Rear']
shock_types
[]
vehicle_count
3

The 75 Series LandCruiser earns its keep loaded, and that's exactly what wears its spring hardware out. The RAW 4x4 BSK1030 is the renewal kit — bushes, shackles, pins and U-bolts — listed to fit the Toyota LandCruiser 75 Series (BJ75/FJ75/HJ75) cab-chassis and Troop Carrier.

Why the BSK1030 matters on a working 75 Series

A cab-chassis or Troopy spends its life carrying weight, and the leaf-spring mounts cop that load every kilometre. The bushes perish, the shackle pins wear and the U-bolts stretch, until the axle starts to move under the truck. The BSK1030 renews the whole mounting set so the springs are clamped and located properly again — the consumable hardware refreshed in one go.

Does it suit my BJ75, FJ75 or HJ75?

It's listed to fit the Toyota LandCruiser 75 Series in BJ75, FJ75 and HJ75 forms, in cab-chassis and Troop Carrier body styles. Spring hardware varies across the LandCruiser range, so the chassis code is the detail we check against. Send us yours and we'll confirm the BSK1030 is right for your build before ordering.

Is this a spring or a compliance part?

Neither — it's the fitting hardware, not the leaf spring, and it's a mechanical part with no emissions role, so it raises none of the catalytic-converter questions an exhaust would. If it's renewed during a height change, any engineering requirements come from the overall build, which we'll talk through.

Fitting it at Oak Flats

Oak Flats Muffler Men fits these kits in-house across the Illawarra, usually when the rear springs are off so the shackles and U-bolts go on fresh. Send your chassis code and we'll confirm the BSK1030 suits your 75 Series and book the work.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

What body styles does the BSK1030 cover?
The Toyota LandCruiser 75 Series cab-chassis and Troop Carrier in BJ75, FJ75 and HJ75 forms. Confirm your chassis code with us.
Is the kit the springs or the hardware?
It's the mounting hardware — bushes, shackles, pins and U-bolts. The leaf springs are separate.
Can you fit it in the Illawarra?
Yes. We supply and fit RAW 4x4 LandCruiser suspension hardware at Oak Flats, usually with a spring change.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.