BSK1034

BSK1034 Bush/shackle/pin/u Bolt KIT for Toyota Hilux N80 (revo) Gun125r, GUN126R Revo

BSK1034 Bush/shackle/pin/u Bolt KIT. Fast shipping, warranty included.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
BSK1034 Bush/shackle/pin/u Bolt KIT for Toyota Hilux N80 (revo) Gun125r, GUN126R Revo UTE / Dual CAB (all… product image

Part specs

heights
[]
positions
['Rear']
shock_types
[]
vehicle_count
3

A complete set of leaf-spring mounting hardware, the RAW 4x4 BSK1034 is a bush, shackle, pin and U-bolt kit listed to fit the Toyota Hilux N80 Revo (GUN125R and GUN126R ute, dual-cab and all variants). It's the refresh kit for the parts that hold the rear springs to the truck.

Why this kit exists

Leaf springs don't work in isolation — they pivot on bushes, swing on a shackle and pin, and are clamped to the axle by U-bolts. All of those wear: bushes perish and crack, U-bolts stretch and lose clamp. On an N80 Revo Hilux that turns up as rear-end clonks and a loose, vague feel. The BSK1034 packages those wear items so the rear suspension can be brought back to a solid, quiet state.

Best fitted alongside a spring change

There's little sense in fitting new leaf springs onto worn bushes and tired U-bolts, so a kit like this is usually installed at the same time as a spring upgrade or replacement. New springs on new hardware is the combination that actually fixes a saggy, noisy rear. If you're only chasing a noise, we'll diagnose which parts are at fault first.

Fitment for the N80 Revo

The BSK1034 is listed to fit the Toyota Hilux N80 Revo on the GUN125R and GUN126R ute, dual-cab and the listed variants. Because kit contents can depend on your spring setup, confirm your exact build with us before ordering rather than going off the platform code.

Fitting at our Oak Flats workshop

Oak Flats Muffler Men installs leaf-spring hardware kits like the BSK1034 in-house across the Illawarra, ideally combined with a rear spring job. RAW 4x4 supply this kit for the N80 Revo; the price is being confirmed, so contact us for the current figure when you book.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

How is the BSK1034 different from a spring?
It's the mounting and wear hardware — bushes, shackle, pin and U-bolts — not the leaf spring itself. It's what holds the springs to the N80 Revo's rear axle.
Does it fit a dual-cab Revo?
It's listed to fit the Toyota Hilux N80 Revo GUN125R/GUN126R ute including dual-cab and the listed variants. Confirm the exact contents for your build with the workshop.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.