BSK1035

BSK1035 Bush/shackle/pin/u Bolt KIT for LDV T60 Mega Tub, MAX Luxe, PRO Ute/dual CAB

BSK1035 Bush/shackle/pin/u Bolt KIT.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
BSK1035 Bush/shackle/pin/u Bolt KIT for LDV T60 Mega Tub, MAX Luxe, PRO Ute/dual CAB product image

Part specs

heights
[]
positions
['Rear']
shock_types
[]
vehicle_count
1

The RAW 4x4 BSK1035 is a bush, shackle, pin and U-bolt kit listed to fit the LDV T60 dual-cab ute, including Mega Tub, Max, Luxe and Pro grades. It's the rear leaf-pack hardware kit — the consumable mounting pieces, not springs or shocks.

What's in a bush, shackle, pin and U-bolt kit?

On a leaf-sprung ute the rear pack is held to the chassis by shackles, pins and bushes, and clamped to the axle by U-bolts. These parts wear: rubber bushes perish, pins and shackles develop play, and U-bolts stretch or corrode. A kit like the BSK1035 bundles those replaceable pieces so the leaf pack can be re-mounted properly when you fit new springs or refresh a tired rear end. It restores the location and clamp the factory designed in — it isn't a lift and doesn't change spring rate.

Why fit the hardware kit with new leaves?

Reusing old bushes and U-bolts on a fresh leaf pack is a false economy — perished rubber and stretched clamps undo the benefit of new springs. Fitting the BSK1035 at the same time means the whole rear mounting is renewed in one go, which is how we prefer to do leaf-spring work on the T60.

Does it fit my LDV T60?

It's listed to fit the LDV T60 dual-cab ute across the Mega Tub, Max, Luxe and Pro grades. The kit contents are matched to the T60's rear leaf setup, so confirm your exact model and build with the workshop before ordering — feed data can be imperfect, and we'd rather check the chassis.

Fitting at Oak Flats in the Illawarra

Oak Flats Muffler Men supplies and fits leaf-spring hardware like the BSK1035 in-house across the Illawarra. We support the axle, drop the pack, press in the new bushes, fit fresh pins, shackles and U-bolts, then torque everything to spec. Send your T60's details and we'll confirm the kit suits it.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Does the BSK1035 include leaf springs?
No — our record lists it as a bush, shackle, pin and U-bolt kit. It's the rear mounting hardware, designed to be fitted with new or existing leaf springs, not the springs themselves.
Which LDV T60 grades does it suit?
It's listed for the T60 dual-cab ute in Mega Tub, Max, Luxe and Pro grades. Confirm your exact build with the workshop so we match the kit to your rear setup.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.