RC-2505

RC 2505 Coil Spring for Dodge RAM 2500 2014 UTE

RC 2505 Coil Spring. Quality guaranteed.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP $645.83 AUD
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
RC 2505 Coil Spring for Dodge RAM 2500 2014 UTE product image

Part specs

heights
['50mm']
positions
['Rear']
shock_types
[]
vehicle_count
1

The RAW 4x4 RC-2505 is a coil spring listed to fit the 2014 Dodge RAM 2500 ute. It's the load-bearing coil for the heavy 2500 — the part holding the truck up and setting how the suspension sits and travels.

What this coil does

A coil spring supports the truck's weight and governs ride height and compression under load, which on the three-quarter-ton RAM 2500 means carrying real mass. The RC-2505 is the RAW 4x4 spring listed for the 2014 2500. We hold no published rate or height data for it, so none is stated here — it's confirmed as the correct coil for this model.

Getting the right spring

It's listed to fit the 2014 Dodge RAM 2500 ute. The year and the 2500 designation are what pin it to the heavy truck rather than the 1500, and the axle position is worth checking. Confirm your exact build with the workshop before ordering.

Why the damper matters too

A coil spring and its shock work as a pair; renewing one and leaving the other worn gives an uneven result. On a working 2500 it's sensible to look at both. We can point you to the matching RAW Nitro shock for the 2014 2500 when you confirm the build.

Fitting at Oak Flats Muffler Men

We fit suspension components in-house across the Illawarra alongside our exhaust work. We verify the RC-2505 against your RAM 2500, fit it with the spring properly controlled and inspect the mounts and bushes. Bring the ute in and we'll sort it.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Which RAM 2500 does the RC-2505 suit?
It's listed for the 2014 Dodge RAM 2500 ute. Confirm your build and axle position with the workshop first.
Are spring specs available?
No rate or height figures are published for this coil, so we won't quote them.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.