EMG123

Toyota 1Y - 2Y - 3Y - Petrol Extractor Gasket

MPI Automotive Toyota 1Y - 2Y - 3Y - Petrol Extractor Gasket.

BrandMantaMPI Automotive

Category: Extractors and headers

RRP $18.84 AUD
In stock at supplier
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
Toyota 1Y - 2Y - 3Y - Petrol Extractor Gasket product image

Part specs

SKU
EMG123
Supplier
MPI Automotive
Category
Extractors and headers
Stock status
In stock at supplier

The MPI Automotive EMG123 is an extractor/manifold gasket listed to fit the Toyota 1Y, 2Y and 3Y petrol engines. It's the sealing gasket between the cylinder head and the extractor or manifold, not the header itself.

What does this gasket cover?

The EMG123 is the flat exhaust gasket for the Toyota Y-series petrol fours — the 1Y, 2Y and 3Y. It seals the joint where the extractor or factory manifold meets the head, keeping exhaust gas in the runner rather than leaking at the flange. It is cut to the Y-series port pattern, which is why it is listed against all three of those engines together.

What is an extractor gasket and what does it do?

An extractor gasket is the replaceable seal between the cylinder head and the extractor or manifold. It is renewed whenever the manifold or extractor comes off — a head job, a leak, or an extractor swap — because heat cycling sets the old material so it won't reseal. A worn gasket ticks or hisses under throttle and can let fumes past. The Y-series fours saw hard service in vans and light commercials, so this is a routine renewal item; its job is to keep the joint sealed through the engine's heat cycles.

Will it suit my Y-series Toyota?

The EMG123 is listed to fit the Toyota 1Y, 2Y and 3Y petrol engines. Other Toyota fours take different gaskets, so confirm your engine and flange with the workshop before ordering.

What does fitting involve at our Illawarra workshop?

Oak Flats Muffler Men fits Y-series manifolds and extractors in-house across the Illawarra. The job means cleaning both faces, checking the flange is flat, and tightening evenly so the gasket seals without being pinched. The EMG123 is supplied by MPI Automotive at an RRP of $18.84; contact us to confirm fitment and book the bay.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

What engines does the EMG123 suit?
It's listed to fit the Toyota 1Y, 2Y and 3Y petrol engines. Confirm your engine with the workshop first.
Is this just the gasket?
Yes — it's the seal between the head and the extractor or manifold, not the header.
Can you fit it?
Yes. Oak Flats Muffler Men fits Y-series gaskets and extractors in the Illawarra; contact us to book.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.