Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partEMG170
Holden Commodore VN VP VQ VR VS VT 5.0L EFI Square Port Extractor Gasket
Holden Commodore VN VP VQ VR VS VT 5.0L EFI Square Port Extractor Gasket (SKU: EMG170) Engineered for a wide range.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $15.25 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- EMG170
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Stock status
- In stock at supplier
The MPI Automotive EMG170 is an extractor gasket listed to fit the Holden Commodore 5.0L EFI with the square-port head. It's the sealing piece between the head and the extractors, not the extractors themselves, so it's the consumable you replace whenever those joints come apart.
What is an extractor gasket and where does it sit?
An extractor gasket seals the joint between the cylinder head's exhaust ports and the extractor flange. It's a wear item: every time the extractors are unbolted, or when a leak develops, you fit a fresh gasket so the joint stays gas-tight. The EMG170 is cut for the square-port pattern on the 5.0L EFI Commodore head, which matters because Holden ran more than one port shape across these engines and the wrong pattern won't seal. There are no performance figures attached to a gasket — its job is simply to keep the seal honest so the extractors flow as intended.
Will it suit my Holden Commodore?
It's listed to fit the Holden Commodore VN, VP, VQ, VR, VS and VT with the 5.0L EFI square-port engine. The square-port qualifier is the one to check — confirm your head's port shape and build with the workshop before ordering, because feed data covers the listing, not your specific car.
Is it road legal?
A gasket is a sealing component, not an emissions part, so it doesn't change the registration status of your vehicle on its own. What matters for compliance is the rest of the exhaust it's bolted into. If you're unsure how your full system sits, raise it with the workshop when you book.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits and replaces extractor gaskets like the EMG170 as part of extractor work across the Illawarra. We confirm the port pattern, clean the mating faces, and torque the flange evenly so the new gasket seats properly. Bring the car in and we'll check the square-port fitment before we start.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the EMG170 actually do?
- It seals the joint between the cylinder head and the extractors on the 5.0L EFI Commodore. It's a consumable you replace when the extractors come off or a leak develops.
- Will it fit any Commodore 5.0L?
- It's listed for the VN to VT 5.0L EFI with the square-port head. Confirm your head's port shape with the workshop, as Holden ran more than one pattern.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.