Patrol Y62 V8 5.6L 3in System, HPC-Extractor, Cats, Centre Hotdog, Rear
MPI AutomotiveRRP$6006.84Patrol Y62 V8 5.6L 3in System, HPC-Extractor, Cats, Centre Hotdog, Rear Tailpipe.
View partEMG190
Nissan Pulsar N14 N15 SR20 2.0L Extractor Gasket
Nissan Pulsar N14 N15 SR20 2.0L Extractor Gasket for selected vehicle applications.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $23.53 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- EMG190
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Stock status
- In stock at supplier
The MPI Automotive EMG190 is an extractor/manifold gasket listed to fit the Nissan Pulsar N14 and N15 with the 2.0-litre SR20 engine. It's the flange seal between the cylinder head and the extractor or factory manifold, not the header itself.
What does this gasket cover?
The EMG190 is the exhaust-face gasket for the SR20-powered Pulsar. It seals the joint where the extractor or factory manifold bolts to the head, keeping the gas from each port inside the runner rather than leaking at the flange. It's cut to the SR20 port pattern, which is why it's listed against the N14 and N15 2.0-litre rather than offered as a generic Nissan four-cylinder gasket.
What is an extractor gasket and what does it do?
An extractor gasket is the soft, replaceable seal between the cylinder head and the exhaust extractor or manifold. Exhaust gas leaves the head hot and under pressure, so the joint depends on a gasket that holds its shape through repeated heat cycles. It's renewed when you fit extractors, swap a manifold, or pull the head — never reused. A failed one tends to tick, hiss, or smell under load, so it's a routine renewal item rather than a performance part in its own right.
Will it suit my SR20 Pulsar?
The EMG190 is listed to fit the Nissan Pulsar N14 and N15 with the 2.0-litre SR20. Because it seals the engine's exhaust face, the key check is the SR20 itself and its flange pattern across those two Pulsar generations. The supplier hasn't published a year range here, so confirm your exact build and flange with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits SR20 extractors and gaskets in-house across the Illawarra. A gasket renewal means cleaning both mating faces, checking the flange is flat and not warped, and torquing the fasteners evenly so the seal isn't pinched. The EMG190 is supplied by MPI Automotive at an RRP of $23.53; contact us to confirm fitment and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the EMG190 suit?
- It's listed to fit the Nissan Pulsar N14 and N15 with the 2.0-litre SR20. Confirm your build and flange with the workshop before ordering.
- Is this the extractor or just the gasket?
- Just the gasket — it's the seal between the head and the extractor or manifold, not the header itself.
- Can you fit it for me?
- Yes. Oak Flats Muffler Men fits SR20 gaskets and extractors in-house in the Illawarra; contact us to book.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Nissan Patrol Y62 V8 5.6L Wagon 3in Full System-Extractors, Hi Flow
MPI AutomotiveRRP$5688.68Nissan Patrol Y62 V8 5.6L Wagon 3in Full System-Extractors, Hi Flow Cats, Medium, Sml Centre Muffler.
View part
Nissan Patrol Y62 V8 5.6L Wagon 3in Full Exhaust System - Extractors, Hi
MPI AutomotiveRRP$5688.68Nissan Patrol Y62 V8 5.6L Wagon 3in Full Exhaust System - Extractors, Hi Flow cats, muffler centre (SKU.
View part
Nissan Patrol Y62 V8 5.6L Wagon 3in Full Exhaust System - Extractors, Hi
MPI AutomotiveRRP$5667.67Nissan Patrol Y62 V8 5.6L Wagon 3in Full Exhaust System - Extractors, Hi Flow cats, hotdog centre.
View part
Nissan Patrol Y62 V8 5.6L Wagon 3in Full Exhaust System - Extractors, Hi
MPI AutomotiveRRP$4775.03Nissan Patrol Y62 V8 5.6L Wagon 3in Full Exhaust System - Extractors, Hi Flow cats, muffler centre (SKU.
View part
Nissan Patrol Y62 V8 5.6L Wagon 3in Full System-Extractors, Hi Flow
MPI AutomotiveRRP$4775.03Nissan Patrol Y62 V8 5.6L Wagon 3in Full System-Extractors, Hi Flow Cats, Medium, Sml Centre Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.