Toyota Landcruiser UZJ200 4.7L V8 Full System 3in Including Extractors
MPI AutomotiveRRP$5467.66MPI Automotive Toyota Landcruiser UZJ200 4.7L V8 Full System 3in Including Extractors, Cats and Catback with Single.
View partEMG217
Toyota 5R 4cyl Petrol Extractor Gasket
MPI Automotive Toyota 5R 4cyl Petrol Extractor Gasket.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $22.75 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- EMG217
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Stock status
- In stock at supplier
The MPI Automotive EMG217 is an extractor/manifold gasket listed to fit the Toyota 5R four-cylinder petrol engine. It's the flange seal that sits between the cylinder head and the extractor or factory manifold, not the header itself.
What does this gasket cover?
The EMG217 is the flat exhaust-face gasket for the Toyota 5R petrol four. It seals the joint where the extractor or factory manifold bolts onto the head, keeping the gas from each port inside the runner instead of leaking past the flange. It is cut to the 5R port pattern, which is why it's listed against that specific engine rather than offered as a generic Toyota four-cylinder gasket.
What is an extractor gasket and what does it do?
An extractor gasket is the soft, replaceable seal between the cylinder head and the exhaust extractor or manifold. Exhaust gas leaves the head hot and under pressure, so the joint relies on a gasket that holds its shape through repeated heat cycles. When you fit new extractors, swap a tired manifold, or pull the head, this is a renewal item rather than something you reuse. A failed one tends to tick, hiss, or smell under load, so it's a routine service part rather than a performance upgrade in its own right.
Will it suit my 5R Toyota?
The EMG217 is listed to fit the Toyota 5R four-cylinder petrol engine. Because it matches the engine rather than one body, it can suit the 5R across the various Toyotas that ran it. The supplier hasn't published a year range or model list here, so confirm your exact engine and flange pattern with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits 5R extractors and gaskets in-house across the Illawarra. A gasket renewal means cleaning both mating faces back to bare metal, checking the flange is flat and not warped, and torquing the fasteners evenly so the seal isn't pinched on one side. The EMG217 is supplied by MPI Automotive at an RRP of $22.75; contact us to confirm fitment and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What engine does the EMG217 suit?
- It's listed to fit the Toyota 5R four-cylinder petrol engine. Confirm your engine and flange pattern with the workshop before ordering.
- Is this the extractor or just the gasket?
- Just the gasket — it's the seal between the head and the extractor or manifold, not the header itself.
- Can you fit it for me?
- Yes. Oak Flats Muffler Men fits 5R gaskets and extractors in-house in the Illawarra; contact us to book.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Toyota Landcruiser UZJ100 4.7L V8 Extractors, Cats & 3in Exhaust
MPI AutomotiveRRP$5259.39Toyota Landcruiser UZJ100 4.7L V8 Extractors, Cats & 3in Exhaust with Centre & Rear Muffler.
View part
Toyota UZJ100 LANDCRUISER 4.7L V8 EXTRACTORS, CATS & 3in EXHAUST
MPI AutomotiveRRP$4936.68Toyota UZJ100 LANDCRUISER 4.7L V8 EXTRACTORS, CATS & 3in EXHAUST WITH CENTRE MUFFLER & REAR TAILPIPE (SKU.
View part
Toyota Landcruiser UZJ200 4.7L V8 Full System 3in Including Extractors
MPI AutomotiveRRP$4905.97Toyota Landcruiser UZJ200 4.7L V8 Full System 3in Including Extractors & Cat Back with Single 3¼in S.
View part
Landcruiser URJ202 4.6L V8 2012 On, 3in Full System Inc Extractor, Cats
MPI AutomotiveRRP$4870.49MPI Automotive Landcruiser URJ202 4.6L V8 2012 On, 3in Full System Inc Extractor, Cats, Centre & Rear Muffler.
View part
Toyota Landcruiser UZJ100 4.7L V8 Extractors, Cats & 3in Exhaust
MPI AutomotiveRRP$4582.89Toyota Landcruiser UZJ100 4.7L V8 Extractors, Cats & 3in Exhaust with Centre & Rear Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.