Toyota Landcruiser UZJ200 4.7L V8 Full System 3in Including Extractors
MPI AutomotiveRRP$5467.66MPI Automotive Toyota Landcruiser UZJ200 4.7L V8 Full System 3in Including Extractors, Cats and Catback with Single.
View partEMG232
Toyota 1.6L 16V DOHC 4AGE Extractor Gasket
Toyota 1.6L 16V DOHC 4AGE Extractor Gasket (EMG232) fits selected vehicle applications. Fast.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $14.94 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- EMG232
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Stock status
- In stock at supplier
The MPI Automotive EMG232 is an extractor/manifold gasket listed to fit the Toyota 1.6-litre 16-valve DOHC 4AGE engine. It's the sealing gasket that sits between the cylinder head and the extractor or manifold flange, not the header itself.
What does this gasket cover?
The EMG232 is the flat gasket for the exhaust face of the 1.6-litre 4AGE twin-cam. It seals the joint where the extractor or factory manifold bolts to the head, so the gas from each port stays in the runner rather than leaking at the flange. It is sized to the 4AGE port pattern, which is why it is listed against that specific 16-valve DOHC engine rather than a generic Toyota four.
What is an extractor gasket and what does it do?
An extractor gasket is the soft, replaceable seal between the cylinder head and the exhaust extractor or manifold. Exhaust gas leaves the head hot and under pressure, so the joint needs a gasket that holds shape through repeated heat cycles. When you fit new extractors, swap a leaking manifold, or pull the head, the old gasket is replaced rather than reused. A failed one ticks, hisses, or smells under load, so it is a routine renewal item rather than a performance part on its own.
Will it suit my 4AGE Toyota?
The EMG232 is listed to fit the Toyota 1.6-litre 16-valve DOHC 4AGE. That engine ran across several rear- and front-drive Toyotas, so the gasket matches the engine rather than one body. Confirm your exact engine and flange with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits 4AGE extractors and gaskets in-house across the Illawarra. A gasket renewal means cleaning both mating faces, checking the flange is flat, and torquing the fasteners evenly so the seal isn't pinched. The EMG232 is supplied by MPI Automotive at an RRP of $14.94; contact us to confirm fitment and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What engine does the EMG232 suit?
- It's listed to fit the Toyota 1.6-litre 16-valve DOHC 4AGE. Confirm your engine and flange with the workshop before ordering.
- Is this the extractor or just the gasket?
- Just the gasket — it's the seal between the head and the extractor or manifold, not the header itself.
- Can you fit it for me?
- Yes. Oak Flats Muffler Men fits 4AGE gaskets and extractors in-house in the Illawarra; contact us to book.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Toyota Landcruiser UZJ100 4.7L V8 Extractors, Cats & 3in Exhaust
MPI AutomotiveRRP$5259.39Toyota Landcruiser UZJ100 4.7L V8 Extractors, Cats & 3in Exhaust with Centre & Rear Muffler.
View part
Toyota UZJ100 LANDCRUISER 4.7L V8 EXTRACTORS, CATS & 3in EXHAUST
MPI AutomotiveRRP$4936.68Toyota UZJ100 LANDCRUISER 4.7L V8 EXTRACTORS, CATS & 3in EXHAUST WITH CENTRE MUFFLER & REAR TAILPIPE (SKU.
View part
Toyota Landcruiser UZJ200 4.7L V8 Full System 3in Including Extractors
MPI AutomotiveRRP$4905.97Toyota Landcruiser UZJ200 4.7L V8 Full System 3in Including Extractors & Cat Back with Single 3¼in S.
View part
Landcruiser URJ202 4.6L V8 2012 On, 3in Full System Inc Extractor, Cats
MPI AutomotiveRRP$4870.49MPI Automotive Landcruiser URJ202 4.6L V8 2012 On, 3in Full System Inc Extractor, Cats, Centre & Rear Muffler.
View part
Toyota Landcruiser UZJ100 4.7L V8 Extractors, Cats & 3in Exhaust
MPI AutomotiveRRP$4582.89Toyota Landcruiser UZJ100 4.7L V8 Extractors, Cats & 3in Exhaust with Centre & Rear Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.