Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partEMG247
Holden Commodore VS VT VU VY ECOTEC 3.8L V6 Extractor Gasket
Holden Commodore VS VT VU VY ECOTEC 3.8L V6 Extractor Gasket for selected vehicle applications.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $23.86 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- EMG247
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Stock status
- In stock at supplier
The MPI Automotive EMG247 is an extractor gasket listed to fit the Holden Commodore VS, VT, VU and VY with the Ecotec 3.8L V6. It is the seal between the cylinder head exhaust face and the extractor or manifold flange.
What is this gasket and where does it sit?
An extractor gasket seals the joint where the manifold or extractor flange bolts onto the cylinder head, keeping exhaust gas in the pipework at the port rather than leaking past the flange. On the Commodore's Ecotec 3.8L V6 it works through constant heat cycling, which is why it is treated as a consumable and renewed whenever that joint is opened. The EMG247 is the gasket pattern matched to this engine, the sealing part rather than any exhaust hardware itself.
Will it suit my Commodore?
It is listed to fit the Holden Commodore VS, VT, VU and VY running the Ecotec 3.8L V6. That covers a long run of Commodore, so confirm your exact model and engine with the workshop before ordering to be sure the EMG247 pattern matches your heads and flange faces across both banks.
When would you fit it?
A fresh gasket goes in any time the joint between a head and the manifold or extractor is opened, whether for a manifold repair or to cure an exhaust leak at the port. The gasket heat-sets in service, so re-using the old one tends to weep once disturbed; new EMG247 gaskets are part of doing the job properly on a V6.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits gaskets like this as part of manifold and extractor work across the Illawarra. We clean the head faces, check the flanges are true and torque evenly so the new gaskets seal first time on both banks. If you only need the part for your own job we can supply the EMG247; its RRP is $23.86.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Which Commodores does the EMG247 suit?
- The VS, VT, VU and VY Commodore with the Ecotec 3.8L V6. Confirm your exact model and engine with the workshop.
- Is this the gasket or the extractors?
- It is the extractor gasket only, the sealing part between the head and the manifold or extractor flange.
- When should it be replaced?
- Any time a head-to-manifold joint is opened, since a heat-set gasket tends to leak once disturbed.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.