EMG251

Nissan Navara, Pathfinder VG30/VG33 V6 Extractor Gasket

Nissan Navara, Pathfinder VG30/VG33 V6 Extractor Gasket for selected vehicle applications.

BrandMantaMPI Automotive

Category: Extractors and headers

RRP $28.89 AUD
In stock at supplier
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
Nissan Navara, Pathfinder VG30/VG33 V6 Extractor Gasket product image

Part specs

SKU
EMG251
Supplier
MPI Automotive
Category
Extractors and headers
Stock status
In stock at supplier

Cut for the Nissan V6, the MPI Automotive EMG251 is an extractor gasket listed to fit the VG30 and VG33 V6 in the Navara and Pathfinder. At $28.89 it's the seal between the head and the extractor flange for those engines.

Which engines does the EMG251 cover?

This gasket is listed for the Nissan VG30 and VG33 V6 as used in the Navara and Pathfinder. A V6 has two exhaust banks, so the gasket pattern has to match the VG-series head; this part is cut for that family. It seals the joint between each cylinder head and the extractor (header) flange that bolts to it.

What the gasket does on a V6

On a V6 every bank needs its flange joint sealed, and the EMG251 is the part that does it on the VG30 and VG33. Clamped between head and extractor, it closes the face so exhaust gas is pushed down the runners instead of leaking out at the joint. A leak there shows up as a tick, lost gas speed, and heat where it shouldn't be — which is why the matched gasket goes on whenever the extractor does.

Is it a service item?

Yes. The EMG251 is a consumable gasket, renewed each time the extractor is pulled off the VG-series V6 rather than reused after it's heat-set. It's listed as the gasket only — extractors, bolts and any other hardware are separate parts.

What does fitting involve at our Illawarra workshop?

Oak Flats Muffler Men fits extractors on the Navara and Pathfinder V6 across the Illawarra, and a fresh head gasket like the EMG251 is part of that install. It's listed to fit the VG30 and VG33; tell us your exact vehicle and engine and we'll confirm the seal before fitting.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

What does the EMG251 fit?
It's listed for the Nissan VG30 and VG33 V6 in the Navara and Pathfinder. Confirm your exact engine with the workshop before ordering.
Is one gasket enough for a V6?
A V6 has two banks, so quantities vary by job. Tell us your build and we'll confirm how many you need.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.