EMG279

Navara 2.4 Petrol DSF Extractor Gasket

Navara 2.4 Petrol DSF Extractor Gasket for selected vehicle applications.

BrandMantaMPI Automotive

Category: Extractors and headers

RRP $21.32 AUD
In stock at supplier
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
Navara 2.4 Petrol DSF Extractor Gasket product image

Part specs

SKU
EMG279
Supplier
MPI Automotive
Category
Extractors and headers
Stock status
In stock at supplier

For the petrol Navara, the MPI Automotive EMG279 is an extractor gasket listed to fit the Nissan Navara 2.4 petrol (DSF). At $21.32 it's the head-to-extractor seal for that engine, not the diesel.

What does the EMG279 fit?

This gasket is listed for the Nissan Navara 2.4 petrol — the DSF reference points to that specific engine application. It's the seal between the cylinder head and the extractor (header) flange. Because petrol and diesel Navaras use different heads and port layouts, picking the petrol-specific gasket matters: the part is matched to the 2.4 petrol, not the oil-burner.

Why the gasket is the part that does the sealing

An extractor is only as good as the joint where it meets the head. The EMG279 sits in that joint and is squeezed between the two flanges to close it off, so all the exhaust gas is driven down the runners. A petrol four like the 2.4 spends time at higher rpm than a diesel, so a clean, leak-free flange keeps the gas moving rather than bleeding pressure at the face.

Replace or reuse?

We fit a new one. A gasket takes a heat set and a clamp impression in service, and once it has it won't reseal as reliably, so the EMG279 goes on fresh whenever the extractor is removed from the petrol Navara. It's sold as the gasket on its own — extractors and bolts are separate items.

How does our Illawarra workshop handle it?

Oak Flats Muffler Men fits extractors on the petrol Navara across the Illawarra and renews the head gasket as part of that work. The EMG279 is listed to fit the Navara 2.4 petrol; give us your build and we'll confirm it's the right seal for your engine before booking the job.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Is the EMG279 for the petrol or diesel Navara?
Petrol — it's listed for the Nissan Navara 2.4 petrol (DSF). The diesel uses a different gasket, so confirm your engine with the workshop first.
Do I get a new gasket every time the extractor comes off?
We recommend it. A used gasket has already heat-set against the head and won't seal as well a second time, so we fit a fresh one.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.