EMG320

Nissan Navara D40 V6 VQ40 2005 - Current Extractor Gasket

Nissan Navara D40 V6 VQ40 2005 - Current Extractor Gasket for selected vehicle applications.

BrandMantaMPI Automotive

Category: Extractors and headers

RRP $57.51 AUD
In stock at supplier
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
Nissan Navara D40 V6 VQ40 2005 - Current Extractor Gasket product image

Part specs

SKU
EMG320
Supplier
MPI Automotive
Category
Extractors and headers
Stock status
In stock at supplier

The MPI Automotive EMG320 is an extractor gasket listed to fit the Nissan Navara D40 with the VQ40 V6 engine, from 2005. It is the sealing gasket that goes between the extractors and the cylinder head on that engine.

What does an extractor gasket do?

An extractor gasket seals the joint between the extractors (or the factory manifold) and the cylinder head, so exhaust gas does not leak out at the flange. The EMG320 is cut for the Nissan Navara D40's VQ40 V6 port pattern. It is a consumable sealing part rather than a performance part; a fresh one goes in whenever the manifold or extractors come off so the joint seals cleanly.

When do you replace it?

Exhaust gaskets are replaced any time the extractors or manifold are removed, and on their own if an old gasket has started to leak or blow at the head. Reusing a crushed gasket tends to leak, so a new EMG320 is cheap insurance when the headers come off the VQ40.

Will it suit my Nissan Navara?

The EMG320 is listed to fit the Nissan Navara D40 with the VQ40 V6 from 2005. Confirm your engine is the VQ40 V6 with the workshop, since the D40 was also sold with other engines that take a different gasket.

What does fitting involve at our Illawarra workshop?

Oak Flats Muffler Men fits and supplies these gaskets in-house across the Illawarra. We fit the EMG320 whenever the Navara's extractors or manifold come off, clean the mating faces and torque the flange evenly so it seals. Supplied by MPI Automotive at $57.51 AUD.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

What does the EMG320 fit?
It is listed to fit the Nissan Navara D40 with the VQ40 V6 engine from 2005. Confirm your engine with the workshop before ordering.
Do I need a new gasket every time?
Yes, fit a fresh gasket whenever the extractors or manifold come off, since a reused one tends to leak.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.