Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partFX-255
Rodeo V6 3.2L 6VD1 Isuzu Engine 1997 - Feb 2003
Rodeo V6 3.2L 6VD1 Isuzu Engine 1997 - Feb 2003.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $846.24 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- FX-255
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive FX-255 is an extractor listed to fit the Holden Rodeo with the 3.2L 6VD1 Isuzu V6, from 1997 to February 2003. It replaces the factory manifolds on that engine with tubular runners.
What is an extractor and what does it change?
An extractor, also called a header, replaces the cast factory exhaust manifold with separate tubular runners off each cylinder. The FX-255 is the version for the 6VD1 V6 Rodeo. The aim is to let the engine breathe out with less restriction than the cast manifolds; it is a change to the exhaust side of the engine rather than an internal power part, and it sits at the front of the system. The supplier has not published tube or outlet dimensions for this listing, so we are not quoting any.
What's the engine and era context here?
This extractor is cut for the 3.2L 6VD1 V6, an Isuzu engine used in the Rodeo, across the 1997 to February 2003 window. That dated cut-off matters: the Rodeo changed over the years, so the part is tied to that specific engine and build period rather than the Rodeo name in general. Matching the engine code and the year is how you land on the right part.
Will it suit my Rodeo?
The FX-255 is listed to fit the Holden Rodeo with the 3.2L 6VD1 Isuzu V6, 1997 to February 2003. Because the fitment is tied to that engine and date range, confirm your exact engine and build with the workshop before ordering rather than going on the model name alone.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits extractors like the FX-255 in-house across the Illawarra. The job means good access to drop the factory manifolds and fresh gaskets on reassembly. Supplied by MPI Automotive at $846.24 AUD; send us your Rodeo's engine and year and we will confirm the fit and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the FX-255 fit?
- It is listed to fit the Holden Rodeo with the 3.2L 6VD1 Isuzu V6, from 1997 to February 2003. Confirm your exact engine and build year with the workshop before ordering.
- Does the year range matter?
- Yes. The fitment runs 1997 to February 2003 and is tied to the 6VD1 engine, so the build period is part of confirming it is the right part.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.