Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partFX-256
Torana LC - LJ 253 - 308 V8
Torana LC - LJ 253 - 308 V8.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $1668.70 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- FX-256
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive FX-256 is a tubular extractor listed to fit the Holden Torana LC and LJ with the 253 or 308 V8. It replaces the cast factory manifolds with tubular headers for the early Torana.
What does this extractor cover?
This is the header section for the Holden Torana LC and LJ fitted with the 253 or 308 V8. It covers the manifold replacement on each bank; it's the extractor only, not a full system. The 253 and 308 are the listed engine sizes, and dropping a V8 into the compact LC-LJ Torana means clearance is tight, so the header's shape is as important as its tube.
What is an extractor and what does it change?
An extractor (header) is the first part off the exhaust ports. The factory cast manifold keeps the runners short and merged to stay compact; a tubular extractor gives each cylinder its own primary before they collect, which is the gain over the cast unit on a V8 like the 253 or 308. In a small, early car like the LC-LJ Torana the bay is tight, so the extractor has to be shaped to fit around the steering and chassis. That's why clearance is checked at fitting rather than assumed.
Will it suit my Torana LC-LJ?
It's listed to fit the Holden Torana LC and LJ with the 253 or 308 V8. Years aren't published beyond those body codes, so send us your build and we'll confirm the FX-256 matches the engine you're running before ordering. We treat the listing as 'listed to fit', not a guarantee, since feed data can be imperfect.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits classic Torana extractors like the FX-256 across the Illawarra. We get the car up, fit each bank, check the headers clear the steering and chassis in the tight LC-LJ bay, and pipe it into your existing system. The RRP is listed at $1668.70, and we confirm the build with you first.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Which engines does the FX-256 suit?
- It's listed for the 253 and 308 V8 in the Holden Torana LC and LJ. Confirm your exact engine with the workshop.
- Is this a complete exhaust?
- No — it's the extractor (header) section only. It replaces the factory manifolds and pipes into your existing system.
- Is fitment tight in an LC-LJ Torana?
- The bay is compact, so the extractor's shape matters and we check clearances carefully at fitting.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.