Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partFX-273
Holden Commodore VL Nissan 6cyl 3.0L EFI Extractor
Holden Commodore VL Nissan 6cyl 3.0L EFI Extractor (SKU: FX-273) Engineered. Quality guaranteed.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $721.78 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- FX-273
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive FX-273 is a tubular extractor listed to fit the Holden Commodore VL with the Nissan 3.0L EFI six-cylinder engine. It replaces the cast factory manifold with a tubular header.
What does this extractor cover?
This is the header section for the VL Commodore running the Nissan-sourced 3.0L EFI six-cylinder. The Nissan engine is what sets this part apart from the V8 and earlier six-cylinder Commodore extractors — the port layout and bay differ. It covers the manifold replacement; it's the extractor only, not a full system.
What is an extractor and what does it change?
An extractor (header) is the first part off the exhaust ports. The factory cast manifold keeps the runners short and merged to stay compact; a tubular extractor gives each cylinder its own primary before they collect, which is the gain over the cast unit on a straight-six like this 3.0L EFI. Because this engine came from Nissan rather than Holden, the extractor is shaped to that head, so the right part is the one matched to the Nissan six. Tubular steel sits exposed in the bay, so clearance is checked when fitting.
Will it suit my VL Commodore?
It's listed to fit the Holden Commodore VL with the Nissan 3.0L EFI six-cylinder. Years aren't published beyond the VL body code, so send us your build and we'll confirm the FX-273 matches your engine and existing system before ordering. We treat the listing as 'listed to fit', not a guarantee, since feed data can be imperfect.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits VL Commodore extractors like the FX-273 across the Illawarra. We get the car up, fit the header, check it clears the bay around the Nissan six, and pipe it into your existing system. The RRP is listed at $721.78, and we confirm the build with you first.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Which engine does the FX-273 suit?
- It's listed for the Holden Commodore VL with the Nissan 3.0L EFI six-cylinder. Confirm your exact build with the workshop.
- Is this a complete exhaust?
- No — it's the extractor (header) section only. It replaces the factory manifold and pipes into your existing system.
- Why is the Nissan engine called out?
- The VL used a Nissan-sourced six-cylinder, so the extractor is shaped to that head. The right part is the one matched to the Nissan six.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.