Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partFX-282
Holden Commodore VB - VS V8 5.0L EFI 4-1 Tuned Extractor 1 3/4 Primary with 3 inch
Holden Commodore VB - VS V8 5.0L EFI 4-1 Tuned Extractor 1 3/4 Primary with 3 inch Outlets (HOLH107) (SKU.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $1423.40 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- FX-282
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive FX-282 is a 4-into-1 tuned extractor set listed to fit the Holden Commodore VB–VS V8 5.0L EFI, built with 1-3/4in primaries and 3in outlets. It's the front-of-system header assembly, listed at $1,423.40.
What does this set cover?
These are extractors — the tubular headers that replace the factory exhaust manifolds and carry gases from each cylinder into the exhaust behind them. This set is a 4-into-1 tuned design, with four primaries merging into a single collector, running 1-3/4in primary tubes into 3in outlets. It's the front-of-system assembly for the VB–VS 5.0L EFI Commodore, not a full exhaust.
What does a 4-into-1 tuned extractor change?
A 4-into-1 header gathers four cylinders into one collector, and a tuned design sets the primary lengths to suit the engine's flow rather than just clearing the bay. The 1-3/4in primaries set the tube size and the 3in outlets set where the system hands off downstream. What it changes most plainly is the front section of the exhaust off the head — everything from the head back to the outlets. It's the part numbered against HOLH107 in this listing.
Will it suit my Holden Commodore?
The FX-282 is listed to fit the Holden Commodore VB through VS with the V8 5.0L EFI engine. Headers tie closely to the engine bay and chassis, so confirm your exact model, engine and clearances with the workshop before ordering to be sure this set lines up.
What does fitting involve at our Illawarra workshop?
Fitting extractors means removing the factory manifolds and mating the headers to the head and the 3in outlets behind them — proper workshop work. Oak Flats Muffler Men fits tuned extractors like this in-house across the Illawarra; send your VB–VS details and we'll confirm clearances and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What size are the FX-282 primaries and outlets?
- 1-3/4in primaries running 4-into-1 into 3in outlets, as listed.
- Which Commodores is it for?
- The Holden Commodore VB through VS with the V8 5.0L EFI engine.
- Is this a complete exhaust system?
- No — it's the extractor (header) set at the front of the exhaust. The rest of the system is separate.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.