Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partFX-282HPC-B
Commodore VB - VS V8 5.0L EFI 4-1 Tuned Extractor 1 3/4 Primary, 3 inch Out - Ceramic
Commodore VB - VS V8 5.0L EFI 4-1 Tuned Extractor 1 3/4 Primary, 3 inch Out - Ceramic Coated (Black).
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $2145.99 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- FX-282HPC-B
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive FX-282HPC-B is a ceramic-coated black tuned extractor listed to fit the Holden Commodore VB to VS with the 5.0L EFI V8. It runs 1-3/4in primaries in a 4-into-1 layout with a 3in outlet.
What does this extractor cover?
This is the header section for the 5.0L EFI V8 Commodore across the VB to VS range. It runs 1-3/4in primary tubes merged 4-into-1, finishing in a 3in outlet, and it's finished in MPI's black ceramic coating — the 'HPC-B' in the part code. It covers the manifold replacement on each bank; it's the extractor only, not a full system.
What is a ceramic-coated tuned extractor and what does it change?
A tuned 4-into-1 extractor sets each primary to a deliberate length so the cylinders' pulses meet at one collector in a chosen rhythm, rather than dumping into the short cast manifold. The ceramic coating is baked onto the steel to hold heat inside the pipe and slow the surface rust bare headers pick up in the bay. On a 5.0L EFI Commodore, the 1-3/4in primaries and 3in outlet are sized for the engine. The trade-off with any tubular header is exposure, so clearance is checked when fitting.
Will it suit my VB-VS Commodore?
It's listed to fit the Holden Commodore VB through VS with the 5.0L EFI V8. Years aren't published beyond those body codes, so send us your build and we'll confirm the FX-282HPC-B matches the engine and the rest of your system before ordering. Because feed data can be imperfect, we treat the listing as 'listed to fit', not a guarantee.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits Commodore extractors like the FX-282HPC-B across the Illawarra. We get the car up, fit each bank, check the 1-3/4in primaries clear the steering, and mate the 3in outlet to the rest of your system. The RRP is listed at $2145.99, and we confirm the build with you first.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the ceramic coating do on the FX-282HPC-B?
- It's a baked-on finish that helps hold heat in the pipe and resists corrosion on the exposed tubing. On this part it's black.
- What are the primary and outlet sizes?
- It runs 1-3/4in primaries in a tuned 4-into-1 layout with a 3in outlet, as listed.
- Which Commodores does it fit?
- It's listed for the VB to VS with the 5.0L EFI V8. Confirm your exact build with the workshop before ordering.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.