Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partFX-294
Torana LH - LX 253 - 308 V8 & HK, HT, HG Holden Extractor - See Notes For Transmission
Torana LH - LX 253 - 308 V8 & HK, HT, HG Holden Extractor - See Notes For Transmission Fitment (SKU: FX-294).
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $913.47 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- FX-294
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive FX-294 is a tubular extractor listed to fit the Holden Torana LH and LX with the 253 or 308 V8, and the Holden HK, HT and HG. Transmission fitment is confirmed by the supplier's notes.
What does this extractor cover?
This is the header section for the early Holden V8 — the 253 and 308 in the Torana LH-LX and the HK-HT-HG range. It replaces the cast factory manifolds with tubular headers on each bank. The listing flags that transmission fitment depends on the supplier's notes, so the gearbox in your car is part of getting the right setup rather than an afterthought. It's the extractor only, not a full system.
What is an extractor and what does it change?
An extractor (header) is the first component off the exhaust ports. The factory cast manifold merges the runners early to stay compact; a tubular extractor gives each cylinder its own primary before they collect, which is where the flow gain over the cast unit sits on a V8 like the 253 or 308. The trade-off is that tubular steel is more exposed in the bay, and on cars of this era the gearbox crossmember and tunnel can affect clearance — which is why transmission detail matters here.
Will it suit my Torana or HK-HT-HG?
It's listed to fit the Holden Torana LH and LX with the 253 or 308 V8, plus the HK, HT and HG. Because transmission fitment is called out in the supplier's notes, tell us your gearbox along with the body — we'll confirm the FX-294 suits the exact build before ordering. Years aren't published beyond the model codes, and we treat the listing as 'listed to fit', not a guarantee.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits classic Holden extractors like the FX-294 across the Illawarra. We get the car up, fit each bank, check clearance around the steering and the gearbox crossmember, and pipe it into your existing system. The RRP is listed at $913.47, and we confirm the build and transmission with you first.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What cars does the FX-294 fit?
- It's listed for the Holden Torana LH-LX with the 253 or 308 V8, and the HK, HT and HG. Confirm your exact build with the workshop.
- Does the gearbox affect fitment?
- Yes — the listing notes transmission fitment depends on the supplier's notes. Tell us your gearbox and we'll confirm the right setup.
- Is this a complete system?
- No — it's the extractor (header) section only. It replaces the factory manifolds and pipes into your existing exhaust.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.