Mazda E Van 1.5 - 2.0L Square Port Universal Fit - Ceramic Coated
MPI AutomotiveRRP$911.56Mazda E Van 1.5 - 2.0L Square Port Universal Fit - Ceramic Coated (Silver).
View partFX-353
Mazda MX5 NA 1.8 LT DOHC Nov 1993 - 1997 Extractor
MPI Automotive Mazda MX5 NA 1.8 LT DOHC Nov 1993 - 1997 Extractor.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $781.70 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- FX-353
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Mazda
- Stock status
- In stock at supplier
The MPI Automotive FX-353 is a set of extractors listed to fit the Mazda MX-5 NA 1.8-litre DOHC, November 1993 to 1997. It replaces the factory exhaust manifold at the head with a tubular extractor design.
What's an extractor and what does it change?
An extractor, or header, replaces the cast manifold bolted to the cylinder head with a tubular set, giving each port its own runner before they merge — the aim being to reduce the back-pressure the engine works against as it clears spent gas. It's the first component in the exhaust, sitting right at the engine, with everything else behind it. On the MX-5's four-cylinder DOHC that's a single tubular set. It's a head-end breathing change only; it doesn't alter the engine's capacity or fuelling.
What does the FX-353 cover?
This listing is the extractor set itself, not a full exhaust. It's specified for the NA-generation MX-5 with the 1.8 DOHC, from November 1993 to 1997 — the later 1.8 NA cars, separating it from the earlier 1.6 version of the same roadster. The engine, head and generation are what decide the fit. Tube diameter, material and finish aren't published by the supplier here, so we'd confirm those with MPI Automotive when you order rather than state figures the record doesn't carry.
Will it suit my MX-5?
It's listed to fit the MX-5 NA 1.8 DOHC, November 1993 to 1997. The 1.8 engine, the DOHC head and the NA generation are the lines that pin this set down, so confirm yours is the 1.8 NA before ordering. Give us your engine and build date and we'll match it to the listing — fitment is listed-to-fit, not guaranteed, because feed data can be imperfect.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits MX-5 extractor sets in-house across the Illawarra. The job means unbolting the old manifold from the head, sealing the new set with fresh gaskets and confirming it ties cleanly into the existing pipework. Send us your MX-5's engine and build date and we'll verify the FX-353 before booking the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Which MX-5 does the FX-353 suit?
- It's listed for the NA-generation MX-5 1.8 DOHC, November 1993 to 1997. Confirm your engine and build date with the workshop, as the earlier NA ran a 1.6.
- Is this a full exhaust system?
- No. It's the extractor set that replaces the manifold at the head. The pipework and muffler behind it are separate.
- What material are the extractors?
- Material isn't published by the supplier in this listing. We can confirm it with MPI Automotive when you order through us.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Mazda 6 GY GV GG 1031 2.3L AUG 02 on, Direct Fit Extractor
MPI AutomotiveRRP$713.12Mazda 6 GY GV GG 1031 2.3L AUG 02 on, Direct Fit Extractor.
View part
Mazda T3500 4cyl Diesel, Rod Gear Change Extractor
MPI AutomotiveRRP$556.74Mazda T3500 4cyl Diesel, Rod Gear Change Extractor (SKU: FX-354) Engineered. Quality guaranteed.
View part
Mazda E Van 1.5 - 2.0L Square Port Universal Fit
MPI AutomotiveRRP$350.38Mazda E Van 1.5 - 2.0L Square Port Universal Fit (FX-152) Fits MAZDA. Fast shipping, warranty included.
View part
Mazda B2600-Ford Raider 2.6L EFI Manifold Gasket
MPI AutomotiveRRP$47.97Mazda B2600-Ford Raider 2.6L EFI Manifold Gasket for selected vehicle applications.
View part
Mazda E3000 HA 4 Cylinder Diesel Extractor Gasket
MPI AutomotiveRRP$24.11Mazda E3000 HA 4 Cylinder Diesel Extractor Gasket for selected vehicle applications.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.