Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partFX-508
Holden Commodore VT - VZ 5.7L & 6.0L 4-1 Extractor 1 3/4in Primaries
Holden Commodore VT - VZ 5.7L & 6.0L 4-1 Extractor 1 3/4in Primaries (Fits up to SSMBC718 Manta) (FX-508).
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $1357.72 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- FX-508
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive FX-508 is a 4-into-1 extractor set with 1-3/4in primaries, listed to fit the Holden Commodore VT-VZ 5.7-litre and 6.0-litre V8. It is listed to suit up to the SSMBC718 Manta system.
What does this extractor set cover?
The FX-508 is a tube extractor set for the VT-VZ Commodore fitted with the 5.7-litre or 6.0-litre V8. It runs 1-3/4in primaries in a 4-into-1 design, with each bank's runners merging into a single collector. The listing ties it to the VT-VZ body, those two V8 capacities, and notes it suits up to the SSMBC718 Manta system — so it is matched to that specific late-model Commodore V8.
What's an extractor and what does it change?
An extractor (header) bolts to the cylinder head in place of the factory manifold. A 4-into-1 design takes the four runners from a bank and merges them into one collector after a length of pipe — here 1-3/4in primaries — to ease back-pressure out of the head. It is the front-most and hottest part of the system. On a 5.7 or 6.0 V8 Commodore it is a common front-end change for owners chasing freer breathing, and it changes the exhaust note compared with the cast manifold.
Will it suit my VT-VZ Commodore?
The FX-508 is listed to fit the VT-VZ Commodore 5.7-litre and 6.0-litre V8, with 1-3/4in primaries, and to suit up to the SSMBC718 Manta system. Confirm your exact engine and any planned cat-back with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits Commodore V8 extractors in-house across the Illawarra. A V8 extractor swap means removing the cast manifolds, fitting fresh gaskets, and reconnecting the front pipework with clearance checks before final tightening. The FX-508 is supplied by MPI Automotive at an RRP of $1,357.72; contact us to confirm fitment and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the FX-508 fit?
- It's listed to fit the VT-VZ Commodore 5.7L and 6.0L V8, with 1-3/4in primaries. Confirm your engine with the workshop first.
- Does it work with a Manta system?
- It's listed to suit up to the SSMBC718 Manta system. Confirm your planned cat-back with the workshop before ordering.
- Can you fit it?
- Yes. Oak Flats Muffler Men fits Commodore V8 extractors in the Illawarra; contact us to book.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.