Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partFX-509HPC-B
Holden Commodore VT VX VU VY VZ 5.7L 6.0L V8 1 7/8in 4 into 1 Extractor - Ceramic Coated
MPI Automotive Holden Commodore VT VX VU VY VZ 5.7L 6.0L V8 1 7/8in 4 into 1 Extractor - Ceramic Coated (Black).
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $2282.45 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- FX-509HPC-B
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive FX-509HPC-B is a ceramic-coated (black) set of four-into-one extractors listed to fit the Holden Commodore VT, VX, VU, VY and VZ with the 5.7L and 6.0L V8. It runs a 1-7/8in primary, so it's a front-of-system header upgrade rather than a tailpipe change.
What does this set of extractors cover?
The FX-509HPC-B is the extractor stage for the V8 Commodore — tubular headers that bolt to the heads in place of the cast manifolds. The slug describes a four-into-one layout on a 1-7/8in primary. They cover the run from the head flanges to the collector; the cat, pipework and mufflers behind them are separate parts.
What are extractors and what do they change?
Extractors give each cylinder its own primary pipe before merging at the collector, rather than the short shared passages of a cast manifold. On a large V8 like the 5.7L and 6.0L the aim is freer breathing out of the heads. The black ceramic coating is a heat-management and finish choice, not a performance claim. The honest trade-offs: tubular headers change the exhaust note, they sit in a tight engine bay so clearance matters, and sensors and heat shields usually need transferring. We publish no power or sound figures for the FX-509HPC-B.
Will it suit my Holden Commodore?
The FX-509HPC-B is listed to fit the VT, VX, VU, VY and VZ Commodore with the 5.7L or 6.0L V8; treat that as a starting point, not a guarantee, because catalogue feed data can be imperfect. The same casting is offered in a silver-coated version and an uncoated version, so confirm finish, engine and exact body code with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits extractors like the FX-509HPC-B in-house across the Illawarra. It is head-end labour in a tight V8 bay: freeing the original manifolds, transferring sensors and shields, and checking clearance and gasket seal at both heads before the rest of the system goes back on. It carries a recommended retail price of $2282.45, supplied by MPI Automotive; if it is not on the shelf we order it in.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the FX-509HPC-B fit my Commodore?
- It's listed to fit the VT, VX, VU, VY and VZ Commodore with the 5.7L or 6.0L V8. Catalogue data can vary by build, so confirm your exact variant with the workshop first.
- How is the black version different from the silver?
- They are the same four-into-one ceramic-coated extractor in different finishes — black for the HPC-B, silver for the HPC-S. Pick the finish with the workshop before ordering.
- Does it include a cat or mufflers?
- No — this is the extractor stage only. The cat, pipework and mufflers behind it are separate parts.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.