Patrol Y62 V8 5.6L 3in System, HPC-Extractor, Cats, Centre Hotdog, Rear
MPI AutomotiveRRP$6006.84Patrol Y62 V8 5.6L 3in System, HPC-Extractor, Cats, Centre Hotdog, Rear Tailpipe.
View partFX-510
Nissan Navara 2WD Z24 & Z20 Petrol Extractor
Nissan Navara 2WD Z24 & Z20 Petrol Extractor (FX-510) Fits NISSAN. Fast shipping, warranty included.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $457.45 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- FX-510
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Nissan
- Stock status
- In stock at supplier
The MPI Automotive FX-510 is a set of replacement extractors listed to fit the two-wheel-drive Nissan Navara with the Z24 and Z20 petrol engines. Extractors replace the factory cast manifold, so this is a front-of-system part rather than a tailpipe change.
What does this set of extractors cover?
The FX-510 is the extractor stage for the 2WD Navara — tubular headers that bolt to the cylinder head where the original cast manifold sat. They cover the section from the head flange to where the rest of the exhaust joins, and nothing behind that. Pipework, any catalytic converter and the mufflers further back are separate parts; this listing supplies the headers only.
What are extractors and what do they change?
Extractors are tubular headers that run each cylinder down its own primary pipe before the pipes merge, instead of the short shared passages of a cast manifold. On older petrol engines like the Z20 and Z24 the aim is freer breathing out of the head. The honest trade-offs: tubular headers usually change the exhaust note, they sit in a tighter space so clearance matters, and original shields or sensor bungs sometimes have to be carried across. We publish no power or sound figures for the FX-510 — those depend on the rest of the system and the tune.
Will it suit my Nissan Navara?
The FX-510 is listed to fit the two-wheel-drive Nissan Navara across the Z24 and Z20 petrol engines; treat that as a starting point, not a guarantee, because catalogue feed data can be imperfect. There is a separate listing for the 4WD cars, so confirm your driveline and engine with the workshop before ordering.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits extractors like the FX-510 in-house across the Illawarra. The work is at the head end: freeing the old manifold, transferring sensors and heat shielding, and checking clearance and gasket seal before the rest of the system goes back on. It carries a recommended retail price of $457.45, supplied by MPI Automotive; if it is not in stock we order it in.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Which Navara engines does the FX-510 suit?
- It's listed for the two-wheel-drive Navara with the Z24 and Z20 petrol engines. The 4WD cars take a different part, so confirm your build with the workshop first.
- Is a catalytic converter included?
- No — the FX-510 is the extractor stage only. Any cat, pipework or mufflers behind it are separate parts.
- Can the workshop fit it?
- Yes. We supply and fit the FX-510 in-house in the Illawarra and check clearance and gasket seal as part of the job.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Nissan Patrol Y62 V8 5.6L Wagon 3in Full System-Extractors, Hi Flow
MPI AutomotiveRRP$5688.68Nissan Patrol Y62 V8 5.6L Wagon 3in Full System-Extractors, Hi Flow Cats, Medium, Sml Centre Muffler.
View part
Nissan Patrol Y62 V8 5.6L Wagon 3in Full Exhaust System - Extractors, Hi
MPI AutomotiveRRP$5688.68Nissan Patrol Y62 V8 5.6L Wagon 3in Full Exhaust System - Extractors, Hi Flow cats, muffler centre (SKU.
View part
Nissan Patrol Y62 V8 5.6L Wagon 3in Full Exhaust System - Extractors, Hi
MPI AutomotiveRRP$5667.67Nissan Patrol Y62 V8 5.6L Wagon 3in Full Exhaust System - Extractors, Hi Flow cats, hotdog centre.
View part
Nissan Patrol Y62 V8 5.6L Wagon 3in Full Exhaust System - Extractors, Hi
MPI AutomotiveRRP$4775.03Nissan Patrol Y62 V8 5.6L Wagon 3in Full Exhaust System - Extractors, Hi Flow cats, muffler centre (SKU.
View part
Nissan Patrol Y62 V8 5.6L Wagon 3in Full System-Extractors, Hi Flow
MPI AutomotiveRRP$4775.03Nissan Patrol Y62 V8 5.6L Wagon 3in Full System-Extractors, Hi Flow Cats, Medium, Sml Centre Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.