Patrol Y62 V8 5.6L 3in System, HPC-Extractor, Cats, Centre Hotdog, Rear
MPI AutomotiveRRP$6006.84Patrol Y62 V8 5.6L 3in System, HPC-Extractor, Cats, Centre Hotdog, Rear Tailpipe.
View partFX-570
Nissan Xtrail T30 2.5L 4cyl QR25 Engine 2001 on Extractor
Nissan Xtrail T30 2.5L 4cyl QR25 Engine 2001 on Extractor.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $732.67 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- FX-570
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Nissan
- Stock status
- In stock at supplier
The MPI Automotive FX-570 is an extractor set listed to fit the Nissan X-Trail T30 2.5L four-cylinder (QR25 engine, 2001 onward). It replaces the factory cast manifold on that four-cylinder X-Trail with a tube-style header.
What does this extractor set cover?
This is a header replacement for the front of the exhaust on the T30 X-Trail. As an in-line four, it covers a single bank, swapping the cast factory manifold for tubular runners that merge into one collector. The listing identifies the QR25 2.5L engine and the T30 body from 2001 onward, so it's matched to that specific generation of X-Trail rather than a universal header that needs adapting to fit.
What's an extractor and what does it change?
An extractor bolts to the cylinder head in place of the factory manifold. The cast item routes exhaust gas through short, uneven passages; an extractor uses tubes of more even length to merge that gas more smoothly, with the aim of easing back-pressure out of the head. It's the front-most and hottest part of the system. On a four-cylinder petrol like the QR25, it's a straightforward front-end replacement and a typical first step before any further exhaust work.
Will it suit my T30 X-Trail?
The FX-570 is listed to fit the QR25 2.5L T30 X-Trail from 2001 onward. The later X-Trail generations are a different body and engine, so confirm your model and engine code with the workshop before ordering this set.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits X-Trail extractors in-house across the Illawarra. A four-cylinder header swap means removing the old manifold, fitting fresh gaskets and reconnecting the front pipework, then checking clearances before final tightening. The FX-570 is supplied by MPI Automotive at an RRP of $732.67; contact us to confirm availability and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Which X-Trail does the FX-570 fit?
- It's listed to fit the Nissan X-Trail T30 2.5L (QR25) from 2001 onward. Confirm your model and engine code with the workshop before ordering.
- Will it suit a later X-Trail?
- No — this set is specific to the T30 QR25. Later X-Trail generations have a different body and engine and take different parts.
- Is the FX-570 in stock?
- It is supplied by MPI Automotive and may be an order-in item. Contact Oak Flats Muffler Men to confirm availability before booking.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Nissan Patrol Y62 V8 5.6L Wagon 3in Full System-Extractors, Hi Flow
MPI AutomotiveRRP$5688.68Nissan Patrol Y62 V8 5.6L Wagon 3in Full System-Extractors, Hi Flow Cats, Medium, Sml Centre Muffler.
View part
Nissan Patrol Y62 V8 5.6L Wagon 3in Full Exhaust System - Extractors, Hi
MPI AutomotiveRRP$5688.68Nissan Patrol Y62 V8 5.6L Wagon 3in Full Exhaust System - Extractors, Hi Flow cats, muffler centre (SKU.
View part
Nissan Patrol Y62 V8 5.6L Wagon 3in Full Exhaust System - Extractors, Hi
MPI AutomotiveRRP$5667.67Nissan Patrol Y62 V8 5.6L Wagon 3in Full Exhaust System - Extractors, Hi Flow cats, hotdog centre.
View part
Nissan Patrol Y62 V8 5.6L Wagon 3in Full Exhaust System - Extractors, Hi
MPI AutomotiveRRP$4775.03Nissan Patrol Y62 V8 5.6L Wagon 3in Full Exhaust System - Extractors, Hi Flow cats, muffler centre (SKU.
View part
Nissan Patrol Y62 V8 5.6L Wagon 3in Full System-Extractors, Hi Flow
MPI AutomotiveRRP$4775.03Nissan Patrol Y62 V8 5.6L Wagon 3in Full System-Extractors, Hi Flow Cats, Medium, Sml Centre Muffler.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.