G6002Y

G6002Y Shock Absorber Nitro for Toyota Landcruiser 70 Series FJ / Bj70, Bj71, FJ / Bj73

G6002Y Shock Absorber Nitro. Fast shipping, warranty…

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
G6002Y Shock Absorber Nitro for Toyota Landcruiser 70 Series FJ / Bj70, Bj71, FJ / Bj73, FJ / BJ74 MID Wheel… product image

Part specs

heights
['0-50mm', '50mm']
positions
['Front', 'Rear']
shock_types
['nitro']
vehicle_count
7

Gas-charged damping for the early 70 Series is what the RAW 4x4 G6002Y is about — a Nitro shock absorber listed to fit the Toyota Landcruiser 70 Series mid-wheelbase wagon (FJ/BJ70, BJ71, FJ/BJ73, FJ/BJ74). The nitrogen charge sets it apart from a plain hydraulic damper.

What the Nitro charge does on a 70

A Nitro shock carries a nitrogen pressure that keeps the damper oil from foaming when it's cycled hard over rough ground — exactly the work an early 70 Series Landcruiser gives its dampers off the bitumen. The G6002Y is the gas-charged unit for the mid-wheelbase 70, so it's aimed at holding damping consistent on long corrugations rather than fading like a basic hydraulic shock.

Which 70 Series does it fit?

It's listed to fit the 70 Series mid-wheelbase models — FJ/BJ70, BJ71, FJ/BJ73 and FJ/BJ74. The correct damper depends on the position and your ride height, so confirm your exact 70 Series build with us before ordering rather than going on the model range alone.

Damper, not ride height

A shock absorber controls movement; it doesn't lift the Landcruiser. Height on a 70 comes from the springs, and we can spec a matched setup if a lift is the goal. On its own the G6002Y is a control part for the listed mid-wheelbase 70.

Fitting in the Illawarra

Oak Flats Muffler Men fits gas shocks like the G6002Y at our Oak Flats workshop, checking the mounts and bushes as the old damper comes out. RAW 4x4 supply this Nitro shock for the mid-wheelbase 70 Series; pricing is being confirmed, so ask us for the current figure when you book.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

What makes the G6002Y a Nitro shock?
It's nitrogen-gas-charged, which helps resist oil aeration and damping fade when worked hard on rough ground, compared with a plain hydraulic shock.
Does it fit a BJ73 Landcruiser?
It's listed to fit the 70 Series mid-wheelbase models including FJ/BJ73. Confirm your exact build and the corner with the workshop before ordering.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.