G6540

G6540 Shock Absorber Nitro for Toyota FJ Cruiser Gsj15, GSJ15R Wagon 4.0l V6

G6540 Shock Absorber Nitro.0l V6 (SKU: G6540) Engineered for selected vehicle applications. Quality guaranteed.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
G6540 Shock Absorber Nitro for Toyota FJ Cruiser Gsj15, GSJ15R Wagon 4.0l V6 product image

Part specs

heights
['0 - 50mm']
positions
['Rear']
shock_types
['nitro']
vehicle_count
7

The RAW 4x4 G6540 is a Nitro shock absorber listed to fit the Toyota FJ Cruiser GSJ15 GSJ15R Wagon 4.0L V6. The shock is the damper — it controls how fast the suspension compresses and rebounds, keeping the tyres settled rather than bouncing.

What does the shock absorber do?

A shock absorber damps the spring: it converts suspension movement into heat so the vehicle doesn't keep bouncing after a bump. RAW 4x4 lists this as a Nitro unit, the brand's nitrogen-charged damper line, which describes the construction rather than any tested figure — we don't quote a number the supplier hasn't published. On a 4x4 the damper matters most over corrugations and load, where worn shocks let the back end skip.

Will it suit my Toyota FJ Cruiser?

It's listed to fit the Toyota FJ Cruiser GSJ15 GSJ15R Wagon 4.0L V6. Damper choice goes with the corner (front or rear), the springs fitted and how the truck is used, so the listing is a starting point. Confirm your exact build with the workshop and we'll match the shock to the rest of your suspension.

Is fitting a shock a compliance issue?

Shocks are suspension parts, not exhaust or emissions hardware, so the exhaust road-legality rules don't apply. Replacing tired dampers is normal maintenance; where shocks are part of a lift, the broader NSW modification rules can apply and we can talk you through them.

What does fitting involve at our Illawarra workshop?

Oak Flats Muffler Men fits shock absorbers in-house across the Illawarra, generally in axle pairs so the vehicle stays balanced side to side. Pricing on this line is confirmed on request — it can be a special-order item, so check current cost and availability with the workshop.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Will the G6540 fit my Toyota FJ Cruiser?
It's listed to fit the Toyota FJ Cruiser GSJ15 GSJ15R Wagon 4.0L V6. Confirm the corner and your exact build with the workshop before ordering.
Should I replace shocks in pairs?
Yes — we fit dampers in axle pairs so both sides behave the same and the vehicle stays balanced.
How do I know my shocks are worn?
Bouncing after bumps, a skittish rear over corrugations, or visible leaking are common signs; we can inspect them when you book in.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.