G6541-1696

G6541 1696 Shock Absorber for Toyota Prado 150 Series Gjr150, Kdj150, KDJ155 without

G6541 1696 Shock Absorber.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
G6541 1696 Shock Absorber for Toyota Prado 150 Series Gjr150, Kdj150, KDJ155 without Kdss LWB & SWB Wagon product image

Part specs

heights
['40mm']
positions
['Front']
shock_types
['nitro']
vehicle_count
2

Carried under RAW 4x4's G6541 base with its own suffix, the G6541-1696 is a shock absorber listed for the Toyota Prado 150 Series (GJR150, KDJ150, KDJ155) without KDSS, in both LWB and SWB wagon. The suffix marks a specific unit, so it's the detail to confirm at order time.

Reading the suffix and the corner

RAW 4x4 lists the 150 Series under the G6541 base with different trailing numbers for different positions and lengths. The -1696 is one of them. RAW hasn't published which corner it covers, so rather than guess we confirm front, rear and quantity against your build before ordering. The shock damps the spring — it stops the suspension oscillating after a bump and keeps the tyre loaded — without setting ride height, which is the spring's job.

The KDSS check before you order

KDSS is Toyota's Kinetic Dynamic Suspension System, a hydraulically linked sway-bar setup fitted to some 150 Series Prados. KDSS and non-KDSS cars use different suspension hardware, so shocks are listed for one or the other. The G6541-1696 is the WITHOUT-KDSS unit, so confirming your Prado isn't KDSS-equipped is the first step — we can check that for you if you're not sure.

Does it suit my 150 Series?

It's listed to fit the Toyota Prado 150 Series (GJR150, KDJ150, KDJ155) without KDSS, in both LWB and SWB wagon. Send your build and KDSS status and we'll confirm the G6541-1696 — and the right corner — before ordering.

Fitting at Oak Flats Muffler Men

We fit 150 Series dampers in-house at Oak Flats, serving the Illawarra. We confirm KDSS or non-KDSS, match the shock to your springs, fit it on the hoist and check travel and clearance before handing it back.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

How is the G6541-1696 different from the other G6541 Prado shocks?
RAW 4x4 uses the trailing suffix to denote a specific position and length. We confirm which corner this one suits before ordering.
Does it suit a KDSS Prado?
No — it's listed for the 150 Series WITHOUT KDSS. Confirm your KDSS status with the workshop before ordering.
Which 150 Series codes does it cover?
It's listed for the GJR150, KDJ150 and KDJ155 without KDSS, in both LWB and SWB wagon.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.