Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partHOLK128U3GTSMALOO-134
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 3/4in headers
MPI Automotive Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 3/4in headers.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $5639.93 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- HOLK128U3GTSMALOO-134
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive HOLK128U3GTSMALOO-134 is the LSA Maloo version: a dual 3in full system with 1-3/4in headers, listed to fit the supercharged Holden VF HSV 6.2L LSA Maloo ute.
Why the LSA Maloo fitment matters
This part is cut for the supercharged LSA 6.2L in the VF Maloo ute, and that's the deciding distinction from the naturally aspirated cars. The LSA Maloo carries the blown engine and the ute body's own rear routing, so the system has to suit both. Getting the LSA-listed part avoids matching a non-LSA system to a supercharged ute.
What does the 1-3/4in header suit?
The header primary here is 1-3/4in. Smaller primaries keep gas speed up through each runner, which generally favours low-down and mid-range response. On the LSA Maloo that's the keener-tube path. We hold no flow, sound or power figures for it and won't put numbers to it; the spec we can state is the 1-3/4in header and the 3in dual bore.
What's in the full system?
This is a complete dual 3in run with headers, replacing the front headers and the pipework through to the rear of the Maloo ute in one package. The dual 3in bore carries a separate path per bank back along the tray. It's a ute-specific routing rather than a sedan or wagon layout.
Road legality and fitting in the Illawarra
Whether the catalytic converter is retained isn't stated in this listing, so NSW emissions compliance is assessed for your specific ute. Oak Flats Muffler Men fits these full systems in-house. Listed RRP is 5639.93 AUD, with fitting quoted once the Maloo is on the hoist.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Is this for the supercharged LSA Maloo?
- Yes, the HOLK128U3GTSMALOO-134 is listed for the VF HSV 6.2L LSA Maloo ute specifically. We confirm your exact build before ordering.
- What header size does it run?
- 1-3/4in primaries, which generally favour low-down and mid-range response. We can't quote dyno figures, as none are published.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.