Redback Performance Headers and 2.5" Exhaust System for Holden Commodore
Redback ExhaustsRRP$2613.75Redback Performance Headers and 2.5" Exhaust System.
View partK-RPM16020
Extractors and Cats for Holden Commodore VE VF V8 Extractors 1 7/8" Pr
Extractors and Cats
BrandRedbackSWD
Category: Extractors and headers
RRP $2523.58 AUD
Order inAfterpay, Zip Pay & Zip Money available
Part specs
- Material Type
- 409 Stainless Steel
- Coating
- Premium Heat-Proof Paint
- Tube Size
- 076mm (3")
- Muffler Option
- Hotdog (Loud)
- Exit
- Twin Out
- Header Outlet Size
- 076mm (3") (RBH327)
- Header Design
- Tuned
- Fits With Air Conditioning
- Yes
- Fits Power Steering
- Yes
- Header Primary Size
- 048mm (1 7/8") (RBH327)
- EGR Fitting
- N/A
- Fitting Time [min.]
- 120
- Vehicle Make
- Holden
The Redback K-RPM16020 is an extractors and cats kit listed to fit the Holden Commodore VE and VF V8, with 1-7/8in primaries. It pairs tubular extractors with catalytic converters as a matched front-of-system package.
What is an extractors and cats kit and what does it change?
An extractors and cats kit replaces the cast factory manifolds with tubular extractors and supplies the catalytic converters that go behind them, so the front of the exhaust is renewed as one matched set. The 1-7/8in figure is the primary tube size at the cylinder head. On a V8 Commodore this is where the exhaust gas first gathers, making it a common foundation for a fuller build. Because the kit includes cats, it keeps catalytic converters in the system rather than deleting them. We publish no flow, power or sound figures and won't quote any.
Will it suit my Holden Commodore?
The K-RPM16020 is listed to fit the Holden Commodore VE and VF V8. The V8's port pattern and the chassis packaging both decide the fit, so confirm your exact VE or VF build with us. We check the listing against your vehicle before ordering rather than assuming the feed is exact.
Is it road legal?
This kit supplies catalytic converters rather than deleting them, so it isn't a cat-delete pipe. Whether the finished setup meets NSW registration requirements still depends on the cat type, the rest of the system and how it's signed off, which we'll go through with you. No compliance approval is published by the supplier and we won't imply one.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits Commodore extractors and cats kits in-house in the Illawarra. We match the K-RPM16020 to your VE or VF V8, fit fresh gaskets, line up the cats and seal the joints for heat cycling. RRP is listed at 2523.58 AUD; fitting labour is quoted once we've seen the car.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Which Commodore does the K-RPM16020 fit?
- It's listed to fit the Holden Commodore VE and VF V8. Confirm your exact build with the workshop before ordering.
- Does it include catalytic converters?
- Yes — it's an extractors and cats kit, so it supplies the cats along with the extractors rather than deleting them.
- What does 1-7/8in mean?
- That's the primary tube size of the extractors at the cylinder head. This kit is listed with 1-7/8in primaries.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Redback Performance Headers and 2.5" Exhaust System for Holden Commodore
Redback ExhaustsRRP$2607.76Redback Performance Headers and 2.5" Exhaust System
View partExtractors and Cats for Holden Commodore VE VF V8 Extractors 1 7/8"
Redback ExhaustsRRP$2523.58Extractors and Cats
View part
Redback Headers for Holden Commodore VE VF V8 Extractors 1 7/8"
SWDRRP$1689.00Redback Headers.
View partRedback Headers for Holden Commodore VE VF V8 Extractors 1 7/8"
Redback ExhaustsRRP$1689.00Redback Headers.
View part
Redback Headers for Holden Commodore VN VP VR VS 5.0 Litre V8 Auto
SWDRRP$1569.00Redback Headers.0 Litre V8 Auto (SKU: RBH034A) Engineered for selected vehicle.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.