Toyota Landcruiser 200 Series V8 4.7L Petrol 2008 to Sep 2015 - Twin 2
PacemakerRRP$3938.50Toyota Landcruiser 200 Series V8 4.7L Petrol 2008 to Sep 2015 - Twin 2 1/2" with Cats and Headers Kit.
View partKB12010-HXMX
Toyota Landcruiser 80 Series 6 Cyl 4.2L 1HZ Diesel 1989/1997 Non Turbo - Single 2 1/2"
Toyota Landcruiser 80 Series 6 Cyl 4.2L 1HZ Diesel 1989/1997 Non Turbo - Single 2 1/2" with Headers Kit.
BrandPacemaker
Category: Extractors and headers
RRP $1924.87 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- KB12010-HXMX
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Toyota 80 Series 6 Cyl Diesel (HZJ80R)
- Stock status
- Confirmed on order
The Pacemaker KB12010-HXMX is a set of tuned extractors (headers) listed to fit the Toyota 4.2L (1989). It runs a 2-1/2in system.
What does this extractor set cover?
Extractors replace the factory exhaust manifolds with longer, tuned primary tubes that gather each cylinder's pulse before merging into the collector. This KB12010-HXMX is the header set itself, replacing the cast manifolds. It's listed as a kit, so the headers come bundled with the matching pipework called out for this fitment.
What are tuned extractors and what do they change?
Extractors (also called headers) are an engine-back change. The trade-off is character: a properly tuned set can free up exhaust flow off each cylinder versus a restrictive cast manifold, but they sit close to the engine, are more involved to fit than a bolt-on muffler, and a header change without the rest of the exhaust matched can shift the note louder than stock. Matched to the 4.2L, this set is sized for that engine rather than being a universal part. That's why fitment is listed against the vehicle, not the badge alone.
Will it suit my Toyota?
It's listed to fit the Toyota 4.2L (1989). Because feed data can be imperfect and these Toyota models ran several builds, confirm the exact build with the workshop before ordering — series, engine and transmission all change which header set is correct.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits extractor sets like the KB12010-HXMX in-house across the Illawarra. Headers sit tight to the engine and steering, so we check clearances, gaskets and oxygen-sensor bungs on the bench before it goes on the hoist. It's listed at $1,924.87 RRP and is typically a special-order item, so send your registration or build details and we'll confirm the part and lead time. On emissions: headers change the manifold section, so road compliance depends on your state's requirements — confirm what's needed for NSW registration with us before fitting.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the KB12010-HXMX fit my Toyota 4.2L?
- It's listed to fit the Toyota 4.2L (1989). Fitment data can be imperfect, so confirm your exact series and engine with the workshop before ordering.
- Is this just the headers or a kit?
- It's listed as a headers kit, so the extractors come with the matching pipework called out for this fitment. We confirm exactly what's in the box when you order.
- Are extractors legal for road use in NSW?
- Extractors replace the manifold section, so road compliance depends on your state's rules. We can talk through what NSW registration needs before you commit to fitting.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Toyota Landcruiser 100 Series V8 4.7L Petrol 1998/2008 - Single 3"
PacemakerRRP$3899.88Toyota Landcruiser 100 Series V8 4.7L Petrol 1998/2008 - Single 3" with Cats and Headers Kit.
View part
Toyota Landcruiser 100 Series V8 4.7L Petrol 1998/2008 - Single 3"
PacemakerRRP$3207.09Toyota Landcruiser 100 Series V8 4.7L Petrol 1998/2008 - Single 3" with CAT Delete Pipes and Headers Kit.
View part
Toyota Prado 120 Series 4L V6 Petrol 2002 to 2009 - Single 2 1/2" CAT
PacemakerRRP$2491.26Toyota Prado 120 Series 4L V6 Petrol 2002 to 2009 - Single 2 1/2" CAT Delete with Headers Kit.
View part
Toyota Landcruiser Troopy 75 Series 6 Cyl 4.2L Non Turbo - Single 2 1/2"
PacemakerRRP$2187.52Toyota Landcruiser Troopy 75 Series 6 Cyl 4.2L Non Turbo - Single 2 1/2" with EGR Headers Kit. (SKU: KB12001-HMX), $2187.52 from Pacemaker.
View part
Toyota Landcruiser Troopy 75 Series 6 Cyl 4.2L Non Turbo - Single 2 1/2
PacemakerRRP$2157.06Toyota Landcruiser Troopy 75 Series 6 Cyl 4.2L Non Turbo - Single 2 1/2 System with Headers Kit.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.