Toyota Landcruiser 200 Series V8 4.7L Petrol 2008 to Sep 2015 - Twin 2
PacemakerRRP$3938.50Toyota Landcruiser 200 Series V8 4.7L Petrol 2008 to Sep 2015 - Twin 2 1/2" with Cats and Headers Kit.
View partKB12015-HXMR
Toyota Landcruiser 80 Series 6 Cyl 4.5L Petrol 1989/1997 - Single 2 1/2" with Headers
Toyota Landcruiser 80 Series 6 Cyl 4.5L Petrol 1989/1997 - Single 2 1/2" with Headers Kit.
BrandPacemaker
Category: Extractors and headers
RRP $2054.59 AUD
Confirmed on orderAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- KB12015-HXMR
- Supplier
- Pacemaker
- Category
- Extractors and headers
- Vehicle fitment
- Toyota 80 Series 6 Cyl Petrol (FZJ80R)
- Stock status
- Confirmed on order
The Pacemaker KB12015-HXMR is a single 2-1/2in exhaust with a headers kit, listed to fit the Toyota Landcruiser 80 Series 6-cylinder 4.5L petrol from 1989. It pairs tuned extractors with a single 2-1/2in system.
What does this kit cover?
This is a single 2-1/2in exhaust supplied with a headers kit. The extractors replace the factory cast manifold with tuned primary tubes that gather each cylinder's exhaust pulse, then feed into a single 2-1/2in system running back through the vehicle. On the KB12015-HXMR that combination covers the run from the head through to the rear, so it's a headers-plus-system kit for the petrol 80 Series rather than a tailpipe-only change.
What does a headers-and-system kit change on a 4x4?
On a four-wheel drive like the 80 Series, extractors are an engine-back change: a tuned set lets exhaust leave each cylinder through purpose-built tubing rather than a restrictive cast manifold, paired here with a matched single 2-1/2in pipe so the whole run is sized together. The trade-off is effort and note — headers sit close to the engine and are more involved to fit than a bolt-on muffler, and the result can be louder than stock. Sized for the 4.5L petrol six, it's listed against the specific vehicle.
Will it suit my Toyota Landcruiser?
It's listed to fit the Toyota Landcruiser 80 Series 6-cylinder 4.5L petrol from 1989. Feed data can be imperfect, so confirm your engine and build with the workshop before ordering — the petrol six is the listing here, and a diesel 80 Series would need a different kit.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men supplies and fits header kits like the KB12015-HXMR in-house across the Illawarra. Headers sit tight to the engine and chassis, so we check clearances, gaskets and sensor bungs, and we route the single 2-1/2in system clear of the driveline before final tightening. It's listed at $2,054.59 RRP and is typically a special-order item, so send your registration or build details and we'll confirm the part and lead time. On emissions: this kit changes the manifold section, so road compliance depends on your state's requirements — confirm what's needed for NSW registration with us before fitting.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- Will the KB12015-HXMR fit my 80 Series Landcruiser?
- It's listed to fit the Toyota Landcruiser 80 Series 6-cylinder 4.5L petrol from 1989. Confirm your engine and build with the workshop before ordering, as fitment data can be imperfect.
- Is this just headers or a full system?
- It's a single 2-1/2in exhaust supplied with a headers kit, so it covers the extractors and the matched system rather than just the manifold or just the rear. We confirm the exact contents with you first.
- Are header kits road legal in NSW?
- This kit changes the manifold section, so road compliance depends on your state's rules. We can talk through what NSW registration needs before you fit it.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
Toyota Landcruiser 100 Series V8 4.7L Petrol 1998/2008 - Single 3"
PacemakerRRP$3899.88Toyota Landcruiser 100 Series V8 4.7L Petrol 1998/2008 - Single 3" with Cats and Headers Kit.
View part
Toyota Landcruiser 100 Series V8 4.7L Petrol 1998/2008 - Single 3"
PacemakerRRP$3207.09Toyota Landcruiser 100 Series V8 4.7L Petrol 1998/2008 - Single 3" with CAT Delete Pipes and Headers Kit.
View part
Toyota Prado 120 Series 4L V6 Petrol 2002 to 2009 - Single 2 1/2" CAT
PacemakerRRP$2491.26Toyota Prado 120 Series 4L V6 Petrol 2002 to 2009 - Single 2 1/2" CAT Delete with Headers Kit.
View part
Toyota Landcruiser Troopy 75 Series 6 Cyl 4.2L Non Turbo - Single 2 1/2"
PacemakerRRP$2187.52Toyota Landcruiser Troopy 75 Series 6 Cyl 4.2L Non Turbo - Single 2 1/2" with EGR Headers Kit. (SKU: KB12001-HMX), $2187.52 from Pacemaker.
View part
Toyota Landcruiser Troopy 75 Series 6 Cyl 4.2L Non Turbo - Single 2 1/2
PacemakerRRP$2157.06Toyota Landcruiser Troopy 75 Series 6 Cyl 4.2L Non Turbo - Single 2 1/2 System with Headers Kit.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.