KB12110-XCMR

Toyota Hilux 150 Series 3L TD D-4D (1KD-FTV) 2005 to Sep 2015 - Single 3" With Centre

Toyota Hilux 150 Series 3L TD D-4D (1KD-FTV) 2005 to Sep 2015 - Single 3" With Centre Muffler and Front Pipe CAT Kit.

BrandPacemaker

Category: Mufflers and resonators

RRP $1802.05 AUD
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
Toyota Hilux 150 Series 3L TD D-4D (1KD-FTV) 2005 to Sep 2015  - Single 3" With Centre Muffler and Front Pipe CAT Kit product image

Part specs

SKU
KB12110-XCMR
Supplier
Pacemaker
Category
Mufflers and resonators
Vehicle fitment
Toyota 150 Series (KUN26R) 3.0L 1KDFTV Turbo Diesel
Stock status
Confirmed on order

The Pacemaker KB12110-XCMR is a 3in centre-muffler kit that includes the front cat pipe, listed to fit the Toyota Hilux 150 Series 3L 1KD-FTV turbo-diesel (from 2005). Bundling the front cat pipe with a chambered centre muffler makes this the most complete and quietest configuration in the KB12110 range.

What's in this kit?

This XCMR build pairs a chambered centre muffler with a front cat pipe, so it covers more of the system than the centre-only kits in the range. The muffler damps the note broadly for a subdued cabin, while the included front pipe means fewer separate sections to source for the 1KD-FTV Hilux.

Why the 3in bore on the 1KD-FTV?

At 3in the system is sized for the 3.0-litre 1KD-FTV turbo-diesel. A larger bore trims the restriction of the factory tailpipe once the turbo is on boost; on a working Hilux that mostly shows as freer breathing. We list the 3in figure as published and quote no power or sound numbers, which the supplier doesn't provide.

Will it suit my 150 Series, and is it legal?

It's listed to fit the Toyota Hilux 150 Series 3L 1KD-FTV from 2005 to September 2015 — confirm your exact build date with the workshop, as the run varies across that span. We make no ADR-compliance claim; exhaust changes on a registered diesel can affect compliance, so confirm your state's requirements first.

Fitting and pricing in the Illawarra

Oak Flats Muffler Men fits these Hilux kits in-house. The KB12110-XCMR carries an RRP of $1,802.05 — the top of the KB12110 range, reflecting the included front cat pipe — and may be a special-order item, so confirm stock at booking. We check hanger alignment and clearance before sign-off.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Does the KB12110-XCMR include the front pipe?
Yes — this kit bundles the front cat pipe with a centre muffler, so it covers more of the system than the centre-only kits.
Muffler or resonator?
It uses a chambered centre muffler, the quieter option in the range.
Will it fit my 1KD-FTV Hilux?
It's listed to fit the Hilux 150 Series 3L 1KD-FTV from 2005; confirm your build date with the workshop.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.