KB12110-XXMX

Toyota Hilux 150 Series 3L TD D-4D (1KD-FTV) 2005 to Sep 2015 - Single 3" With Centre

Toyota Hilux 150 Series 3L TD D-4D (1KD-FTV) 2005 to Sep 2015 - Single 3" With Centre Muffler and Rear Pipe Only Kit.

BrandPacemaker

Category: Mufflers and resonators

RRP $1357.72 AUD
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
Toyota Hilux 150 Series 3L TD D-4D (1KD-FTV) 2005 to Sep 2015  - Single 3" With Centre Muffler and Rear Pipe Only Kit. product image

Part specs

SKU
KB12110-XXMX
Supplier
Pacemaker
Category
Mufflers and resonators
Vehicle fitment
Toyota 150 Series (KUN26R) 3.0L 1KDFTV Turbo Diesel
Stock status
Confirmed on order

The Pacemaker KB12110-XXMX pairs a 3in centre muffler with a rear pipe-only finish, listed to fit the Toyota Hilux 150 Series 3L 1KD-FTV turbo-diesel (from 2005). Its defining feature is that rear pipe-only section — a centre muffler doing the silencing, then plain pipe to the tip with no rear box.

Centre muffler plus rear pipe-only

This XXMX runs a chambered centre muffler and finishes with rear pipe rather than a rear muffler box. The centre muffler still damps the note broadly, but the pipe-only rear keeps the back of the system free, giving a slightly harder tail than a build with a second silencer. It's the centre-only family (no front cat pipe).

Why the 3in bore?

The 3in diameter is sized for the 3.0-litre 1KD-FTV turbo-diesel, reducing factory tailpipe restriction once the turbo is on boost. We list the 3in figure as published by Pacemaker; no power, flow or sound data is supplied, so none is quoted.

Will it fit, and is it legal?

It's listed to fit the Toyota Hilux 150 Series 3L 1KD-FTV from 2005 to September 2015; confirm your exact build date with the workshop, as the run varies. We make no ADR-compliance claim; exhaust changes on a registered diesel can affect compliance, so confirm your state's requirements before fitting.

Sourcing and fitting in the Illawarra

Oak Flats Muffler Men fits these Hilux sections in-house. The KB12110-XXMX is the keenest-priced kit in the range at an RRP of $1,357.72, reflecting the centre-only, pipe-only-rear layout, and may be a special-order item; confirm stock at booking. We check clearance and hanger alignment before sign-off.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Does the KB12110-XXMX have a rear muffler?
No — it uses a centre muffler then finishes with a rear pipe-only section, so there's no rear box.
Does it include the front pipe?
No — it's a centre-section kit without the front cat pipe.
Will it fit my 1KD-FTV Hilux?
It's listed to fit the Hilux 150 Series 3L 1KD-FTV from 2005; confirm your build date with the workshop.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.