KB4210-XCMX

Ford Ranger PX 1 and PX 2 3.2L (P5AT) 2011 to Sept 2016 (without DPF) - Single 3"

Ford Ranger PX 1 and PX 2 3.2L (P5AT) 2011 to Sept 2016 (without DPF) - Single 3" with Centre Muffler and CAT Kit (KB4210-XCMX) at $1758.60 RRP.

BrandPacemaker

Category: Mufflers and resonators

RRP $1758.60 AUD
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
Ford Ranger PX 1 and PX 2 3.2L (P5AT) 2011 to Sept 2016 (without DPF) - Single 3" with Centre Muffler and CAT Kit product image

Part specs

SKU
KB4210-XCMX
Supplier
Pacemaker
Category
Mufflers and resonators
Vehicle fitment
Ford PX 1 (2011-2015) PX 2 (2015-2018)
Stock status
Confirmed on order

The Pacemaker KB4210-XCMX bundles the cat with a 3in centre muffler, listed to fit the Ford Ranger PX1 and PX2 3.2L P5AT turbo-diesel (2011 to September 2016). It's the with-cat, centre-muffler build — the quieter and most emissions-conservative of the KB4210 kits.

Cat plus centre muffler — what you get

This XCMX kit keeps the catalytic converter and runs a chambered centre muffler on a 3in section for the 3.2L P5AT Ranger. The muffler damps the note broadly for a subdued cabin, while retaining the cat keeps the factory emissions hardware in place — the conservative end of the KB4210 range.

Why the 3in bore on the 3.2 Ranger?

At 3in the system is sized for the 3.2-litre five-cylinder P5AT. A bore this size trims the restriction of the factory tailpipe once the turbo is on boost; on a working ute that mostly shows as freer breathing. We list the 3in figure as published and quote no power or sound data, which the supplier doesn't provide.

Is it road legal?

Because the KB4210-XCMX retains the catalytic converter, the emissions hardware the Ranger left the factory with stays in place — the usual compliance sticking point on a diesel ute. We make no ADR-compliance claim regardless; confirm your exact PX1/PX2 build and your state's requirements with the workshop before fitting.

Fitting and sourcing in the Illawarra

Oak Flats Muffler Men fits these Ranger kits in-house. The KB4210-XCMX carries an RRP of $1,758.60, reflecting the included cat, and may be a special-order item, so confirm stock at booking. We check hanger alignment and clearance to the body before sign-off.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Does the KB4210-XCMX keep the catalytic converter?
Yes — this is the with-cat build, so the factory cat is retained.
Muffler or resonator?
It uses a chambered centre muffler, the quieter option in the range.
Will it fit my PX Ranger?
It's listed to fit the Ford Ranger PX1 and PX2 3.2L P5AT from 2011 to September 2016; confirm your build with the workshop.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.