KBD4210-XXMX

Ford Ranger PX 2 and PX 3 3.2L (P5AT) October 2016 to 2022 (with DPF) - Single 3" Centre

Ford Ranger PX 2 and PX 3 3.2L (P5AT) October 2016 to 2022 (with DPF) - Single 3" Centre Muffler DBF Back Kit (KBD4210-XXMX) at $1018.25 RRP.

BrandPacemaker

Category: Mufflers and resonators

RRP $1018.25 AUD
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
Ford Ranger PX 2 and PX 3 3.2L (P5AT) October 2016 to 2022 (with DPF) - Single 3" Centre Muffler DBF Back Kit product image

Part specs

SKU
KBD4210-XXMX
Supplier
Pacemaker
Category
Mufflers and resonators
Vehicle fitment
Ford PX 2 (2015-2018) PX 3 (2018-2022)
Stock status
Confirmed on order

The Pacemaker KBD4210-XXMX runs a centre muffler in its single 3in DPF-back kit for the Ford Ranger PX2/PX3 3.2L (P5AT, 2016–2022, with DPF) — the centre-muffler version that leans toward a quieter result.

What does the centre muffler change here?

Putting a muffler in the centre of this 3in DPF-back kit dampens by absorption and reflection, so the 3.2L P5AT stays the more subdued of the two layouts in this Ranger family. That's the trade against the centre-resonator version, which is tuned to attack drone rather than overall volume. For owners who want the quieter cab, this is the build to choose.

What is a DPF-back kit, and what's a 3in single?

This is the section from behind the factory diesel particulate filter rearward, supplied as a kit with the pipework and hardware to complete the run. The DPF and the emissions hardware ahead of it stay in place. A single 3in bore is larger than the standard tailpipe — the part a workshop changes to free flow and set the note on the P5AT Ranger.

Will it suit my PX2 or PX3 Ranger?

This Pacemaker kit is listed to fit the Ford Ranger PX2 and PX3 3.2L (P5AT) from October 2016 to 2022 with DPF. Ranger builds vary across that span, so confirm your exact variant with Oak Flats Muffler Men before ordering.

What does fitting involve at our Illawarra workshop?

We fit this DPF-back kit at Oak Flats in the Illawarra, joining it behind the factory DPF, hanging the centre muffler on the chassis mounts and routing the kit pipework with clearance along the rail and over the rear axle. It keeps the factory DPF in place; confirm any state registration requirements with us when booking.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Is the KBD4210-XXMX the quieter option for the Ranger?
Yes — the centre muffler dampens by absorption, making it the more subdued of the two centre-section layouts in this family.
Does it come as a complete kit?
It's supplied as a DPF-back kit with the pipework and hardware to complete the section behind the factory DPF.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.