KBD4210-XXXR

Ford Ranger PX 2 and PX 3 3.2L (P5AT) October 2016 to 2022 (with DPF) - Single 3" DPF

Ford Ranger PX 2 and PX 3 3.2L (P5AT) October 2016 to 2022 (with DPF) - Single 3" DPF Back with Centre Resonator Kit.

BrandPacemaker

Category: Mufflers and resonators

RRP $1018.25 AUD
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
Ford Ranger PX 2 and PX 3 3.2L (P5AT) October 2016 to 2022 (with DPF) - Single 3" DPF Back with Centre Resonator Kit product image

Part specs

SKU
KBD4210-XXXR
Supplier
Pacemaker
Category
Mufflers and resonators
Vehicle fitment
Ford PX 2 (2015-2018) PX 3 (2018-2022)
Stock status
Confirmed on order

The Pacemaker KBD4210-XXXR fits a centre resonator instead of a muffler in its single 3in DPF-back kit for the Ford Ranger PX2/PX3 3.2L (P5AT, 2016–2022, with DPF) — tuned to cut drone while keeping more of the diesel's voice.

Why a centre resonator on the Ranger?

A resonator is a tuning device aimed at a specific frequency, so in this kit it targets the highway drone owners of the 3.2L P5AT tend to notice without the broadband damping a centre muffler applies. The result keeps more of the diesel note than the muffler version while taking the edge off cruise resonance — the opposite trade in this Ranger family.

What's a DPF-back kit, and the 3in single?

This is the run from behind the factory diesel particulate filter rearward, supplied as a kit with the pipework and hardware to finish the section. The DPF and the emissions hardware in front of it stay put. A single 3in bore is larger than the standard tailpipe — the section a workshop swaps to free flow and shape the sound on the P5AT.

Is it listed for my PX2/PX3 Ranger?

This Pacemaker kit is listed to fit the Ford Ranger PX2 and PX3 3.2L (P5AT) from October 2016 to 2022 with DPF. Specifications differ across the run, so confirm your exact build with Oak Flats Muffler Men before ordering.

How is it fitted in the Illawarra?

Our Oak Flats workshop joins this DPF-back kit behind the factory DPF, mounts the centre resonator on the chassis hangers and routes the kit pipework with clearance along the rail and over the rear axle. It retains the factory DPF; confirm any state registration requirements with us when you book.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Will the resonator version be louder than the muffler one?
It keeps more of the diesel's voice, since a resonator targets drone rather than applying the broadband damping of a muffler.
Is the KBD4210-XXXR a complete kit?
Yes — it's supplied as a DPF-back kit with the pipework and hardware to complete the section behind the factory DPF.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.