M1099K

M1099K Shock Absorber for Toyota Hilux N70 (vigo) Ggn, KUN25 / Ggn, KUN26 Vigo UTE

M1099K Shock Absorber. Fast shipping, warranty included.

BrandRAW 4x4

Category: Suspension and 4x4 parts

RRP pending
Confirmed on order
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
M1099K Shock Absorber for Toyota Hilux N70 (vigo) Ggn, KUN25 / Ggn, KUN26 Vigo UTE / Dual CAB (all Variants) product image

Part specs

heights
[]
positions
['Rear']
shock_types
[]
vehicle_count
2

Replacing tired dampers on an N70 Vigo Hilux starts with the right part number, and the RAW 4x4 M1099K is a shock absorber listed to fit the Toyota Hilux N70 Vigo (GGN/KUN25 and GGN/KUN26 ute, dual-cab and all variants). It's a direct damper replacement rather than a full kit, so it suits a like-for-like refresh of a worn corner.

What does a shock absorber actually do?

A shock absorber controls the speed at which the spring compresses and rebounds, so the tyre stays planted instead of the body floating and pitching. On a working ute like the N70 Vigo Hilux, dampers wear gradually — you notice it as wallow over dips, a busy ride on corrugations, and slower body settle after a bump. The M1099K is the replacement damper for that job; it doesn't change ride height on its own, it restores the damping the vehicle was built around.

Will the M1099K suit my N70 Hilux?

It's listed to fit the Toyota Hilux N70 Vigo across the GGN/KUN25 and GGN/KUN26 ute platforms, in dual-cab and the listed variants. Position, front or rear, and whether you're running stock or raised height all change which damper is correct, so it's worth confirming your exact build with us before ordering rather than going on the model code alone.

Is this a single shock or a set?

The M1099K is supplied as a shock absorber for the listed application. Most owners replace dampers in pairs across an axle so both sides behave the same, and we can advise how many your job needs once we know which corner you're chasing. RAW 4x4 list this part for the N70 Hilux; pricing on this one is being confirmed, so ask us for the current figure.

What does fitting involve at our workshop?

Oak Flats Muffler Men fits suspension parts like this in-house across the Illawarra. We check the mounting bushes, the eyes and the surrounding hardware while the damper is out, since a fresh shock bolted to perished mounts won't feel right. Send through your N70 Vigo build and we'll confirm the correct damper for the position and book the bay.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Does the M1099K fit a dual-cab N70 Hilux?
It's listed to fit the Toyota Hilux N70 Vigo ute including dual-cab across the GGN/KUN25 and GGN/KUN26 variants. Confirm your exact build with the workshop before ordering.
Will this change my ride height?
No. A replacement shock absorber restores damping control; it doesn't lift or lower the vehicle on its own. Ride height comes from the springs.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.