MBE182

Landcruiser HJ75 Ute 2 1/2in Extractor Connecting Pipe To Suit FX-669

Landcruiser HJ75 Ute 2 1/2in Extractor Connecting Pipe To Suit FX-669 for selected vehicle applications.

BrandMantaMPI Automotive

Category: Extractors and headers

RRP $238.66 AUD
In stock at supplier
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
Landcruiser HJ75 Ute 2 1/2in Extractor Connecting Pipe To Suit FX-669 product image

Part specs

SKU
MBE182
Supplier
MPI Automotive
Category
Extractors and headers
Stock status
In stock at supplier

The MPI Automotive MBE182 is a 2-1/2in extractor connecting pipe, listed to fit the Toyota Landcruiser HJ75 Ute and made to suit the FX-669.

What is this connecting pipe?

The MBE182 is the 2-1/2in connecting pipe that links the extractor to the rest of the exhaust on the HJ75 Ute Landcruiser. It is made to suit the FX-669, so it is the joining section between those extractors and the system behind them rather than a complete exhaust. It is supplied as the pipe.

What does a connecting pipe do in the system?

A connecting pipe carries the gas from the extractor collector back into the main exhaust, and its diameter and routing set how cleanly the two sections mate. At 2-1/2in it matches the bore the FX-669 extractor feeds into. Because it is a length of pipe rather than a silencer or converter, there is no flow or sound claim to make for the part on its own; it is about a clean, sealed join in the right size.

Will it suit my HJ75?

It is listed to fit the HJ75 Ute Landcruiser, paired with the FX-669. The pairing with the FX-669 is the key match, since the pipe is sized and shaped to suit those extractors. Confirm your exact build, and that you are running the FX-669, with the workshop before ordering.

What does fitting involve at our Illawarra workshop?

A connecting pipe is fitted between the extractor and the system behind it, so both ends need to line up and seal. Oak Flats Muffler Men supplies and fits the MBE182 in the Illawarra, checking the match to the FX-669 and that both joins seal cleanly on the HJ75 before handover.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

What does the MBE182 connect to?
It is the 2-1/2in connecting pipe between the extractor and the rest of the system on the HJ75 Ute, made to suit the FX-669.
Is it a full exhaust?
No. It is the connecting pipe only. Confirm you are running the FX-669 extractor with the workshop before ordering.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.