MKGW0011

GWM Cannon Alpha Ute,2.0L Turbo Petrol Hybrid,2025 On,3in Catback Centre & Extended Rear

GWM Cannon Alpha Ute,2.0L Turbo Petrol Hybrid,2025 On,3in Catback Centre & Extended Rear Muffler for selected vehicle applications.

BrandMantaMPI Automotive

Category: Mufflers and resonators

RRP $1607.05 AUD
In stock at supplier
Afterpay, Zip Pay & Zip Money available
Afterpay acceptedZip accepted — Zip Pay and Zip Money
GWM Cannon Alpha Ute,2.0L Turbo Petrol Hybrid,2025 On,3in Catback Centre & Extended Rear Muffler product image

Part specs

SKU
MKGW0011
Supplier
MPI Automotive
Category
Mufflers and resonators
Stock status
In stock at supplier

Twin muffling is what marks out the MPI Automotive MKGW0011: this 3in cat-back runs both a centre muffler and an extended rear muffler, so it's the quietest-biased option in the Cannon Alpha family. It's listed to fit the GWM Cannon Alpha 2.0L turbo-petrol hybrid from 2025-on.

Why a centre and extended rear muffler?

Carrying two mufflers — one mid-system and an extended unit at the rear — gives the most sound absorption of the cat-back variants in this range. Each chamber takes another pass at the harsher frequencies, so the MKGW0011 leans toward a settled, refined note rather than a hard edge. For owners who want the freer-flowing 3in path without a loud cabin, that twin-muffler layout is the reason to choose it.

What does the 3in cat-back replace?

A cat-back changes the exhaust from behind the catalytic converter rearward. The 3in bore matches the Cannon Alpha's 2.0L turbo-petrol hybrid driveline, and because the run starts after the converter, the factory emissions hardware and its sensors stay untouched.

Will it suit my GWM Cannon Alpha?

It's listed to fit the 2025-on GWM Cannon Alpha ute with the 2.0L turbo-petrol hybrid setup. Builds vary across the range, so pass your exact configuration to the workshop and we'll confirm both mufflers and the hanger points clear your vehicle before ordering.

What does fitting involve at the workshop?

Oak Flats Muffler Men supplies and fits this MPI Automotive cat-back in-house across the Illawarra. With two mufflers in the run we confirm hanger spacing and clearance front to rear, check the listed fitment, and book the bay. The RRP is $1,607.05.

Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.

Common questions

Why does the MKGW0011 have two mufflers?
It pairs a centre muffler with an extended rear muffler, giving the most sound absorption of the cat-back options for this ute and a more subdued note.
Does it keep the catalytic converter?
Yes. As a cat-back it begins behind the converter, so the factory emissions equipment stays in place.
Is it listed for the 2025 Cannon Alpha hybrid?
Yes — it's listed to fit the 2025-on GWM Cannon Alpha 2.0L turbo-petrol hybrid. Confirm your build with the workshop before ordering.

Fitment support across the Illawarra

Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.
Show nearby fitment areasCollapse section

Book the right exhaust job without guessing.

Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.