Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0022
Holden Commodore VL Commodore 3.0L 6 Cylinder 2.5in With Extractors Muffler/Tailpipe
Holden Commodore VL Commodore 3.0L 6 Cylinder 2.5in With Extractors Muffler/Tailpipe.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $1920.66 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0022
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MKHN0022 is a 2.5in extractor-back system listed to fit the Holden Commodore VL 3.0L six-cylinder. It runs extractors into a muffler, working the exhaust from the manifolds back.
What are extractors and what do they change?
Extractors, or headers, replace the cast factory manifolds with tubular runners off each cylinder. The MKHN0022 carries those into a 2.5in system finished with a muffler. On the VL's 3.0L six, the aim is to ease the way the engine breathes out compared with the cast manifold. It is a change to the exhaust side of the engine and works as part of the wider system, not a power claim on its own.
What size is the system?
Built at 2.5in and finished through a muffler, this is the extractor-back path for the VL 3.0L six, with the 2.5in the more modest bore alongside the 3in option. The figure sets the pipe size the rest of the system mates to, and the muffler keeps the note civil rather than open. Material is not published by the supplier.
Will it suit my Holden VL Commodore?
The MKHN0022 is listed to fit the Holden Commodore VL 3.0L six-cylinder; confirm the exact build with the workshop first. On a car of this era, matching a 2.5in extractor-back system to your specific build and existing exhaust matters before you order.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits extractor systems like the MKHN0022 in-house across the Illawarra. The work means access to drop the factory manifold, fresh gaskets, and matching the 2.5in run to the rest of the exhaust on an older car. Supplied by MPI Automotive at $1,920.66 AUD; send your car's details and we will confirm the fit and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the MKHN0022 fit?
- It is listed to fit the Holden Commodore VL 3.0L six-cylinder. Confirm your exact build with the workshop before ordering.
- What size is the system?
- It is a 2.5in system finished with a muffler.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.