Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0032
Holden Commodore VL Commodore V8 2.5in With Extractors Muffler/Tailpipe
Holden Commodore VL Commodore V8 2.5in With Extractors Muffler/Tailpipe (MKHN0032) Fits HOLDEN. Fast.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $2730.42 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0032
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MPI Automotive MKHN0032 is a 2.5in extractor-and-exhaust package for the V8 Holden Commodore VL, finished through a muffler and tailpipe. Its character is that single muffler-and-tailpipe rear — one muffler feeding a tailpipe exit, rather than a twin-muffler run — on the 2.5in V8 system.
What does the muffler-and-tailpipe finish change?
Rather than carrying two mufflers, the MKHN0032 runs a single muffler into a tailpipe at the rear of its 2.5in system. That's a simpler, more direct rear than a twin-muffler build, fed by extractors on the V8. It's a header-back package covering the heads-back run, sized at 2.5in to keep gas speed up on a street V8.
What do extractors change on the VL V8?
Extractors replace the cast factory manifolds with tubular primaries, giving each cylinder its own path to the collector. The honest trade-offs are more fitting labour, extra radiated heat and less clearance than the standard manifolds. Behind them, the 2.5in pipework and the muffler-and-tailpipe rear set the final result.
Will it suit my VL V8?
It's listed to fit the V8 Holden VL Commodore. Confirm your exact engine and body with the workshop before ordering, since the listing covers the VL V8 family rather than every running change.
What does fitting involve at the Illawarra workshop?
Oak Flats Muffler Men supplies and fits these VL V8 systems on-site. We confirm the 2.5in run, single muffler and tailpipe exit clear your floor and suit the car, then book the bay. Send your build and we'll confirm the listed fitment.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What's the rear setup on the MKHN0032?
- A single muffler into a tailpipe — a simpler rear than a twin-muffler run, on the 2.5in V8 system.
- Which engine is it for?
- The V8 Holden VL Commodore. Confirm your exact build with the workshop before ordering.
- Does it include extractors?
- Yes — it's a header-back package pairing tubular extractors with the 2.5in muffler-and-tailpipe exhaust.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.