Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0036
Holden Commodore VN VP VR Sedan V6 3.8L With Extractors WOM/Muffler
Holden Commodore VN VP VR Sedan V6 3.8L With Extractors WOM/Muffler (MKHN0036) Fits HOLDEN. Fast.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $2034.78 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0036
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MKHN0036 is an extractor-back system listed to fit the Holden Commodore VN, VP and VR 3.8L V6 Sedan, run without a muffler. It works the exhaust from the manifolds back.
What are extractors and what do they change?
Extractors, or headers, replace the cast factory manifolds with tubular runners off each cylinder. The MKHN0036 carries them into a system configured without a muffler, so the run is left more open than a muffled version. The aim is to ease how the 3.8L V6 breathes out compared with the cast manifolds; it is a change to the exhaust side of the engine and works as part of the wider system.
Does it run a muffler?
This system covers the VN, VP and VR 3.8L V6 Sedan and leaves out the muffler for a more open path than its muffled counterpart. The pipe diameter is not published by the supplier, so confirm it with the workshop when matching the rest of the system.
Will it suit my Holden?
The MKHN0036 is listed to fit the Holden Commodore VN, VP and VR 3.8L V6 Sedan; confirm your series and engine with the workshop before ordering, since the without-muffler setup and the fitment both need to match the car.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits extractor systems like the MKHN0036 in-house across the Illawarra. The job means good access to drop the factory manifolds, fitting fresh gaskets, and matching the system to the rest of the exhaust. Supplied by MPI Automotive at $2,034.78 AUD; send us your car's details and we will confirm the fit and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the MKHN0036 fit?
- It is listed to fit the Holden Commodore VN, VP and VR 3.8L V6 Sedan. Confirm your exact series with the workshop before ordering.
- Does it run a muffler?
- It is configured without a muffler; the pipe diameter is not published by the supplier.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.