Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6639.02MPI Automotive Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 7/8in HPC Extractors 3.5in Tips.
View partMKHN0041
Holden Commodore VP VR Sedan V6 3.8L IRS 2.5in With Extractors Muffler
Holden Commodore VP VR Sedan V6 3.8L IRS 2.5in With Extractors Muffler/Muffler.
BrandMantaMPI Automotive
Category: Extractors and headers
RRP $2422.13 AUD
In stock at supplierAfterpay, Zip Pay & Zip Money available
Part specs
- SKU
- MKHN0041
- Supplier
- MPI Automotive
- Category
- Extractors and headers
- Vehicle fitment
- Holden
- Stock status
- In stock at supplier
The MKHN0041 is a 2.5in extractor-back system listed to fit the Holden Commodore VP and VR 3.8L V6 Sedan with IRS. It runs extractors through a twin-muffler path, working the exhaust from the manifolds back.
What are extractors and what do they change?
Extractors, or headers, replace the cast factory manifolds with tubular runners off each cylinder. The MKHN0041 feeds those into a 2.5in system using two mufflers along its length. The aim is to ease the way the 3.8L V6 breathes out compared with the cast manifolds. It is a change to the exhaust side of the engine and works as part of the wider system rather than a standalone figure.
Why two mufflers, and what does IRS mean here?
The muffler-muffler layout splits silencing across two units for a quieter, more settled note than an open run. The IRS reference marks this as the independent rear suspension build, which changes the underbody at the rear and so dictates the routing. The 2.5in figure sets the pipe size the rest of the system mates to; material is not published by the supplier.
Will it suit my Holden VP or VR Sedan?
The MKHN0041 is listed to fit the Holden Commodore VP and VR 3.8L V6 Sedan with IRS; confirm the exact build with the workshop first. Because the IRS underbody differs from a live-axle car, matching this 2.5in extractor system to your specific rear end matters before you order.
What does fitting involve at our Illawarra workshop?
Oak Flats Muffler Men fits extractor systems like the MKHN0041 in-house across the Illawarra. The work means access to drop the factory manifolds, fresh gaskets, and matching the twin-muffler run around the IRS rear end. Supplied by MPI Automotive at $2,422.13 AUD; send your car's details and we will confirm the fit and book the bay.
Stocked and fitted by Oak Flats Muffler Men, the Illawarra exhaust and 4x4 specialist in Oak Flats, NSW.
Common questions
- What does the MKHN0041 fit?
- It is listed to fit the Holden Commodore VP and VR 3.8L V6 Sedan with IRS. Confirm your exact build with the workshop before ordering.
- How many mufflers does it run?
- Two. It uses a muffler-muffler layout on a 2.5in path for quieter silencing.
Fitment support across the Illawarra
Fitment checks near you across 18 Illawarra suburbs, from Oak Flats and Shellharbour to Wollongong and Kiama.Show nearby fitment areasCollapse section
Oak Flats Muffler Men can check this part against supplier specs, part number, image, RRP and vehicle details for customers around Oak Flats, Shellharbour, Wollongong, Dapto, Albion Park, Kiama and the northern suburbs.
Check fitment near Oak FlatsCheck fitment near Albion Park RailCheck fitment near ShellharbourCheck fitment near WollongongCheck fitment near DaptoCheck fitment near WarillaCheck fitment near CorrimalCheck fitment near WoononaCheck fitment near BulliCheck fitment near ThirroulCheck fitment near KiamaCheck fitment near Albion ParkCheck fitment near Lake IllawarraCheck fitment near Mount WarrigalCheck fitment near Barrack HeightsCheck fitment near Barrack PointCheck fitment near BlackbuttCheck fitment near Flinders
Related parts in this category
More extractors and headers the workshop supplies and fits. Send the vehicle and the part you are weighing up for a fitted quote.
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6639.02MPI Automotive DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 78in headers, 3.5in tips.
View part
Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6550.21MPI Automotive Holden DPE VF HSV LSA V8 Sedan & Wagon dual 3in full system with 1 7/8in coated headers.
View part
DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated
MPI AutomotiveRRP$6502.43DPE Holden Commodore VE VF V8 Sedan & Wagon dual 3in full system, coated 1 3/4in headers, 3.5in tips.
View part
Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1
MPI AutomotiveRRP$6502.43Holden Commodore VE VF V8 Ute & WM/WN Caprice Dual 3in Full System 1 3/4in HPC Extractors 3.5in Tips.
View part
Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in
MPI AutomotiveRRP$6443.54Holden DPE VF HSV 6.2L LSA Maloo ute dual 3in full system with 1 7/8in coated headers.
View partBook the right exhaust job without guessing.
Send the vehicle make, model, year, engine, current issue, desired sound or performance goal, and clear photos of the existing exhaust where available.